Toyota Camry 1998 — Verified Specs, Fluids & OBD2
2.2L I4 • Gasoline
© Wikimedia Commons CC BY-SA
Every figure on this Toyota Camry 1998 page is aggregated and cross-checked against more than 6.6 million real workshop operations, NHTSA records and OEM technical sources — and updated continuously. No invented estimates.
The Toyota Camry 1998 uses Toyota Genuine 5W-30 engine oil. Its battery is group 35 (BCI), rated at 500A cold-cranking amps. It is powered by a 2.2L I4 engine. Use the sections below for verified fluids, battery, OEM tyres, the maintenance schedule, recommended parts and the most commonly reported OBD2 fault codes for this vehicle.
Engine temperature over limits — check coolant level, thermostat and radiator.
Related codes: P0217
ECU detects insufficient oil pressure — check oil level and sensor.
Related codes: P0522
Oil pressure below critical threshold — stop the engine and check immediately.
Related codes: P0524
Faulty ECU processor — requires specialist workshop diagnosis.
Related codes: P0606
Throttle actuator motor circuit open — loss of throttle response.
Related codes: P2100
Prices may vary by area and workshop.
Average independent-workshop hourly labour rates, to estimate repair costs in your country.
Recommended tools and accessories for the Toyota Camry 1998 — OBD2 scanners, battery testers, oils and tool kits — from our country partner.
⚠️ Specific tyre size not yet verified for this vehicle.
Enter the size shown in the logbook or on the tyre sidewall to search compatible offers.
Run a workshop? Join the TroubleAtlas Professional Program: turn this technical encyclopedia into local customers and manage your shop with built-in tools.
- ✓Your workshop suggested to nearby users among the recommended local workshops
- ✓Enhanced local GEO visibility
- ✓AI reception & booking desk
- ✓Workshop management tools
- ✓Used-equipment marketplace (buy/sell among professionals)
35
All documented fault codes for this vehicle
The most documented diagnostic codes for this model, by system and severity. Tap a code for the full guide.
60 warning lights classified by urgency. Appears on your vehicle? Check the urgency level.
Show all dashboard warning lights
602 owner complaints filed with the U.S. National Highway Traffic Safety Administration (NHTSA) for the Toyota Camry 1998. These are real, verified reports submitted by vehicle owners.
THE BRAKES ARE MAKING GRINDING NOISE. THEY HAVE BEEN CHANGED ONCE BY THE DEALERSHIP AT 13000 MILES, AND THEN AT 27000 MILES THEY WERE AGAIN CHANGED BY SEARS. BUT THE BRAKES ARE GETTING WORN OUT EASILY AND THE GRINDING SOUND WILL NOT STOP…
DURING A 70 MPH FRONTAL CRASH, THE AIR BAG DID NOT DEPLOY AND THE DRIVER'S HEAD HIT THE WINDSHIELD.
WHILE DRIVING 70 MPH THE DRIVER HEARD A LOUD NOISE WHICH CAME FROM UNDERNEATH THE HOOD AND SMOKE BEGAN TO COME INSIDE THE VEHICLE THROUGH THE VENTS. THE DRIVER WAS ABLE TO PULL OVER TO THE SHOULDER BEFORE THE VEHICLE EXPLODED. THE DRIV…
CONSUMER CALLED COMPLAINING ABOUT HAVING PROBLEM WITH INTERMITTENTLY CHECK ENGINE LIGHT. (MODULE SENSOR) DEALER HAS INSPECTED SINCE 1998 AND PROBLEM COULD NO DUPLICATE OR CORRECT THE PROBLEM. PLEASE PROVIDE FURTHER INFORMATION. TS
Source: NHTSA complaints database (U.S. data.gov). Figures shown for model year 1998.
Manufacturer torque values for safety-critical fasteners on the Toyota Camry 1998.
| Component | System | Torque |
|---|---|---|
| Camshaft R&R — Cam Phaser Bolt | engine | 65.0 Nm |
| Camshaft R&R — Camshaft Pulley Bolt | engine | 74.0 Nm |
| Timing Belt Kit — Camshaft Sprocket Bolt | engine | 80.0 Nm |
| Timing Belt Tensioner — Camshaft Sprocket Bolt | engine | 75.0 Nm |
| Timing Belt — Camshaft Position Sensor | engine | 10.0 Nm |
| Timing Belt — Camshaft Sprocket Bolt | engine | 125.0 Nm |
| Variable Valve Timing Actuator — Cam Phaser Bolt | engine | 65.0 Nm |
| Catalytic Converter - California — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| Catalytic Converter - California — Flange Bolts | exhaust | 50.0 Nm |
| Catalytic Converter - Direct Fit — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| Catalytic Converter - Direct Fit — Flange Bolts | exhaust | 50.0 Nm |
| Catalytic Converter - Universal — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| Catalytic Converter - Universal — Flange Bolts | exhaust | 50.0 Nm |
| O2 Sensor - Downstream — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| O2 Sensor - Downstream — Flange Bolts | exhaust | 50.0 Nm |
| O2 Sensor - Upstream — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| O2 Sensor - Upstream — Flange Bolts | exhaust | 50.0 Nm |
| O2 Sensors - All — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| O2 Sensors - All — Flange Bolts | exhaust | 50.0 Nm |
| AC Evaporator — AC Line Fittings | hvac | 20.0 Nm |
Frequently Asked Questions
What is the right battery for the Toyota Camry 1998?
What engine oil should I use on the Toyota Camry 1998?
Which OBD2 fault codes are commonly documented for the Toyota Camry 1998?
How often should the Toyota Camry 1998 be serviced?
Bookmark this page to consult it at the workshop or when buying parts. TroubleAtlas updates its technical data continuously — check back for new information on the Toyota Camry 1998.
