Toyota Camry 1999: Full Technical Specs & OBD2 Diagnostics
2.2L I4 • Gasoline
© Wikimedia Commons CC BY-SA
Every figure on this Toyota Camry 1999 page is aggregated and cross-checked against more than 6.6 million real workshop operations, NHTSA records and OEM technical sources — and updated continuously. No invented estimates.
The Toyota Camry 1999 uses Toyota Genuine 5W-30 engine oil. Its battery is group 24F (BCI), rated at 575A cold-cranking amps. It is powered by a 2.2L I4 engine. Use the sections below for verified fluids, battery, OEM tyres, the maintenance schedule, recommended parts and the most commonly reported OBD2 fault codes for this vehicle.
Engine temperature over limits — check coolant level, thermostat and radiator.
Related codes: P0217
ECU detects insufficient oil pressure — check oil level and sensor.
Related codes: P0522
Oil pressure below critical threshold — stop the engine and check immediately.
Related codes: P0524
Faulty ECU processor — requires specialist workshop diagnosis.
Related codes: P0606
Throttle actuator motor circuit open — loss of throttle response.
Related codes: P2100
Prices may vary by area and workshop.
Average independent-workshop hourly labour rates, to estimate repair costs in your country.
Recommended tools and accessories for the Toyota Camry 1999 — OBD2 scanners, battery testers, oils and tool kits — from our country partner.
⚠️ Specific tyre size not yet verified for this vehicle.
Enter the size shown in the logbook or on the tyre sidewall to search compatible offers.
No official recall verified for this vehicle in the NHTSA database.
Run a workshop? Join the TroubleAtlas Professional Program: turn this technical encyclopedia into local customers and manage your shop with built-in tools.
- ✓Your workshop suggested to nearby users among the recommended local workshops
- ✓Enhanced local GEO visibility
- ✓AI reception & booking desk
- ✓Workshop management tools
- ✓Used-equipment marketplace (buy/sell among professionals)
24F
All documented fault codes for this vehicle
The most documented diagnostic codes for this model, by system and severity. Tap a code for the full guide.
60 warning lights classified by urgency. Appears on your vehicle? Check the urgency level.
Show all dashboard warning lights
588 owner complaints filed with the U.S. National Highway Traffic Safety Administration (NHTSA) for the Toyota Camry 1999. These are real, verified reports submitted by vehicle owners.
ACCELERATOR PEDAL STICKS WHEN TRYING TO ACCELERATE FROM A DEAD STOP OR SLOW ROLL. SOMETIMES IT TAKES A HARD STOMP TO BREAK FREE OR TO HOLD DOWN BRAKE PEDAL AND ACCELERATOR PEDAL AT SAME TIME WHEN STOPPED AT LIGHT OR STOP SIGN. PERSONALLY…
VEHICLE EXPERIENCES ONGOING PROBLEM WITH HEADLIGHTS UNABLETO ADJUST PROPERLY. LEFT SIDE ALWAYS APPEARS TO BE ADJUSTED TOO FAR DOWN, MORE THEN THE RIGHT SIDE. VEHICLE BEEN IN/OUT OF DEALER SHOP ON FIVE OCCASIONS, AND NOTHING CAN BE FOUND…
WHEN DRIVING AND UPON DEPRESSING BRAKE PEDAL TO MAKE A NORMAL STOP PEDAL TRAVELED TO FLOORBOARD, CAUSING EXTENDED STOPPING DISTANCE. ALSO, CONSUMER HEARD NOISE COMING FROM FRONT END. FRONT BRAKE PADS WERE EXPERIENCING EXCESSIVE WEAR…
MOTOR REGULATORS FOR THE WINDOWS ARE FAILING. LR REGULATOR CASTLED HINGE PIN MAL-FORMED AND DISLODGED FROM THE ASSEMBLY. POWER WINDOW WAS THEN NON-FUNCTIONAL AND WINDOW WOULD FALL WHEN MANUALLY RAISED UP, CREATING A SECURITY ISSUE, AND…
Source: NHTSA complaints database (U.S. data.gov). Figures shown for model year 1999.
Manufacturer torque values for safety-critical fasteners on the Toyota Camry 1999.
| Component | System | Torque |
|---|---|---|
| Camshaft R&R — Cam Phaser Bolt | engine | 65.0 Nm |
| Camshaft R&R — Camshaft Pulley Bolt | engine | 74.0 Nm |
| Timing Belt Kit — Camshaft Sprocket Bolt | engine | 80.0 Nm |
| Timing Belt Tensioner — Camshaft Sprocket Bolt | engine | 75.0 Nm |
| Timing Belt — Camshaft Position Sensor | engine | 10.0 Nm |
| Timing Belt — Camshaft Sprocket Bolt | engine | 125.0 Nm |
| Variable Valve Timing Actuator — Cam Phaser Bolt | engine | 65.0 Nm |
| Catalytic Converter - California — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| Catalytic Converter - California — Flange Bolts | exhaust | 50.0 Nm |
| Catalytic Converter - Direct Fit — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| Catalytic Converter - Direct Fit — Flange Bolts | exhaust | 50.0 Nm |
| Catalytic Converter - Universal — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| Catalytic Converter - Universal — Flange Bolts | exhaust | 50.0 Nm |
| O2 Sensor - Downstream — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| O2 Sensor - Downstream — Flange Bolts | exhaust | 50.0 Nm |
| O2 Sensor - Upstream — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| O2 Sensor - Upstream — Flange Bolts | exhaust | 50.0 Nm |
| O2 Sensors - All — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| O2 Sensors - All — Flange Bolts | exhaust | 50.0 Nm |
| AC Evaporator — AC Line Fittings | hvac | 20.0 Nm |
Frequently Asked Questions
What is the right battery for the Toyota Camry 1999?
What engine oil should I use on the Toyota Camry 1999?
Which OBD2 fault codes are commonly documented for the Toyota Camry 1999?
How often should the Toyota Camry 1999 be serviced?
Bookmark this page to consult it at the workshop or when buying parts. TroubleAtlas updates its technical data continuously — check back for new information on the Toyota Camry 1999.
