
Toyota Camry 2020 Manual — Codes, Tyres & Parts
2.5L I4 • Gasoline

© Wikimedia Commons CC BY-SA
Every figure on this Toyota Camry 2020 page is aggregated and cross-checked against more than 6.6 million real workshop operations, NHTSA records and OEM technical sources — and updated continuously. No invented estimates.
The Toyota Camry 2020 uses Toyota Genuine 0W-20 engine oil. Its battery is group 35 (BCI), rated at 640A cold-cranking amps. It is powered by a 2.5L I4 engine. Use the sections below for verified fluids, battery, OEM tyres, the maintenance schedule, recommended parts and the most commonly reported OBD2 fault codes for this vehicle.
Engine temperature over limits — check coolant level, thermostat and radiator.
Related codes: P0217
ECU detects insufficient oil pressure — check oil level and sensor.
Related codes: P0522
Oil pressure below critical threshold — stop the engine and check immediately.
Related codes: P0524
Faulty ECU processor — requires specialist workshop diagnosis.
Related codes: P0606
Throttle actuator motor circuit open — loss of throttle response.
Related codes: P2100
Prices may vary by area and workshop.
Average independent-workshop hourly labour rates, to estimate repair costs in your country.
Recommended tools and accessories for the Toyota Camry 2020 — OBD2 scanners, battery testers, oils and tool kits — from our country partner.
⚠️ Specific tyre size not yet verified for this vehicle.
Enter the size shown in the logbook or on the tyre sidewall to search compatible offers.



Run a workshop? Join the TroubleAtlas Professional Program: turn this technical encyclopedia into local customers and manage your shop with built-in tools.
- ✓Your workshop suggested to nearby users among the recommended local workshops
- ✓Enhanced local GEO visibility
- ✓AI reception & booking desk
- ✓Workshop management tools
- ✓Used-equipment marketplace (buy/sell among professionals)
35
All documented fault codes for this vehicle
The most documented diagnostic codes for this model, by system and severity. Tap a code for the full guide.
60 warning lights classified by urgency. Appears on your vehicle? Check the urgency level.
Show all dashboard warning lights
257 owner complaints filed with the U.S. National Highway Traffic Safety Administration (NHTSA) for the Toyota Camry 2020. These are real, verified reports submitted by vehicle owners.
The contact owns a 2020 Toyota Camry. The contact stated that while the local dealer was performing preventive maintenance on the vehicle, there was an abnormal winding sound detected. The dealer determined that the transmission needed t…
The contact owns a 2020 Toyota Camry. The contact received notification of NHTSA Campaign Number: 23V865000 (Air Bags); however, the part to do the recall repair was not yet available. The contact stated that the "Failure - Ignition Cont…
I went a few months ago to Toyota to get an air flow valve replaced from a safety campaign for Toyota. My car engine light came on. Afterwards it never went off. My car shuts off after getting gas . Car doesn’t start for 20 mins. Coolant…
Dead battery at 21000 miles. Car is less than 2 years old and didn't drive it for 36 hours and the battery completely drained. Even after jump start electronic dash wouldn't function properly.
Source: NHTSA complaints database (U.S. data.gov). Figures shown for model year 2020.
Manufacturer torque values for safety-critical fasteners on the Toyota Camry 2020.
| Component | System | Torque |
|---|---|---|
| Camshaft R&R — Cam Phaser Bolt | engine | 65.0 Nm |
| Camshaft R&R — Camshaft Pulley Bolt | engine | 74.0 Nm |
| Timing Belt Kit — Camshaft Sprocket Bolt | engine | 80.0 Nm |
| Timing Belt Tensioner — Camshaft Sprocket Bolt | engine | 75.0 Nm |
| Timing Belt — Camshaft Position Sensor | engine | 10.0 Nm |
| Timing Belt — Camshaft Sprocket Bolt | engine | 125.0 Nm |
| Variable Valve Timing Actuator — Cam Phaser Bolt | engine | 65.0 Nm |
| Catalytic Converter - California — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| Catalytic Converter - California — Flange Bolts | exhaust | 50.0 Nm |
| Catalytic Converter - Direct Fit — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| Catalytic Converter - Direct Fit — Flange Bolts | exhaust | 50.0 Nm |
| Catalytic Converter - Universal — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| Catalytic Converter - Universal — Flange Bolts | exhaust | 50.0 Nm |
| O2 Sensor - Downstream — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| O2 Sensor - Downstream — Flange Bolts | exhaust | 50.0 Nm |
| O2 Sensor - Upstream — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| O2 Sensor - Upstream — Flange Bolts | exhaust | 50.0 Nm |
| O2 Sensors - All — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| O2 Sensors - All — Flange Bolts | exhaust | 50.0 Nm |
| AC Evaporator — AC Line Fittings | hvac | 20.0 Nm |
Frequently Asked Questions
What is the right battery for the Toyota Camry 2020?
What engine oil should I use on the Toyota Camry 2020?
Which OBD2 fault codes are commonly documented for the Toyota Camry 2020?
How often should the Toyota Camry 2020 be serviced?
Have a specific fault code on your Toyota Camry 2020? Search the code in the OBD2 section of this page or use the full TroubleAtlas DTC database. Need tyres? Compare prices and compatible sizes in the TroubleAtlas comparator.



