Table 9 Fan fault
The F22 error code on Ferroli boilers indicates table 9 fan fault.
Ferroli F22 means: table 9 fan fault. The usual causes are fan motor failure (seized bearings or burned windings), fan speed sensor fault or wiring fault between fan and pcb. You can safely reset the boiler once — if F22 returns, do not keep resetting. A qualified heating engineer should diagnose the root cause.
What Does F22 Mean
The F22 code is shown by the boiler’s control board when it detects table 9 fan fault. The boiler then stops instead of continuing to run in that condition: the code is the appliance reporting a problem, not proof that the boiler is broken.
| What you see on the boiler |
|---|
| The display shows F22 and the boiler stops until the fault is cleared |
Common Causes
Causes documented in 2 technical sources.
| Cause |
|---|
| Fan motor failure (seized bearings or burned windings) |
| fan speed sensor fault |
| wiring fault between fan and PCB |
| air pressure switch fault (stuck open or closed) |
| blocked flue or air intake restricting airflow |
| condensate blocking the siphon or trap |
Safety Warning
F22 involves electrical or pressure-related components. Do not attempt repairs without proper qualifications. Ensure the boiler is electrically isolated before any inspection. If you notice water leaks, unusual sounds, or pressure anomalies, contact a qualified heating engineer immediately.
Parts & Prices
Prices shown are indicative. Actual prices and availability vary by region.
Step-by-Step Diagnosis
Listen for the fan — it should start before ignition. If silent, check power supply to the fan motor
Spin the fan manually (with power off) — if it feels stiff or gritty, the bearings are worn
Check the wiring connections between the fan and PCB
Test the air pressure switch — with the fan running, the switch should close. Disconnect and test with a multimeter for continuity
Check the flue for blockages — inspect the full length including the terminal
Verify the condensate trap is clear
Measure the fan speed signal at the PCB (Hall sensor output)
How to Fix It
Replace the fan motor assembly if bearings are worn or motor is not running
replace the air pressure switch if it is stuck or reading incorrectly
clear any flue or condensate blockage
repair or replace damaged wiring
if PCB is not providing the signal, replace the PCB
Refer to the Ferroli service documentation for the detailed procedure. Only a qualified engineer should carry out these repairs.
Diagnostic Tools
TroubleAtlas Score
What Is the TroubleAtlas Score?
Every boiler model is independently evaluated and scored by TroubleAtlas across 6 dimensions: reliability, efficiency, parts availability, service network, value for money, and user satisfaction. The score helps you compare models and make informed decisions when choosing a new boiler.
See All Boiler Scores →Boiler Breakdown Cover
Boiler Breakdown Cover
Protect against unexpected repair costs. Cover plans include annual service, emergency callouts within 24 hours, and full parts replacement. Compare plans side by side and choose the level of protection that fits your home and budget.
Coverage Plans — Coming SoonConsidering a New Heating System
Considering a New Heating System?
If your boiler or heat pump is over 10 years old, replacing it with a modern condensing boiler or air-source heat pump could save you up to 30% on energy bills and significantly reduce your carbon footprint.
Compare Heating System Prices →
YouTube Channel
Watch the fixes. Follow the channel.
Step-by-step boiler repair guides, equipment reviews, and heating system comparisons from qualified engineers.
New fixes every weekFix in 5
Quick fixes for common boiler faults explained in under 5 minutes
Boiler Comparator
Side-by-side comparisons of popular boiler models
Boiler Reviews
Independent reviews with TroubleAtlas Score ratings
Find a Specialist
Don’t fix it alone. Find a trusted heating engineer near you.
TroubleAtlas connects you with vetted local heating professionals who can inspect, diagnose and repair your boiler safely — no guesswork, no unnecessary call-outs.
Local heating professionals are coming to your area
We’re onboarding Gas Safe registered and licensed HVAC engineers city by city. Check back soon, or search above to see current availability.
TroubleAtlas Pro
Get cited by AI. Get found by customers.
TroubleAtlas Pro puts your business in front of homeowners searching for exactly this fault, and structures your listing so AI assistants can cite you as a trusted source.
- ✓ Appear on error code pages viewed by thousands of homeowners
- ✓ AI assistants cite your listing as a verified local specialist
- ✓ Receive direct leads with customer name and contact details
- ✓ TroubleAtlas Certified badge for your marketing materials
Affected Models
Ferroli models that can display fault code F22:
| Model Family | Output Range | Frequency |
|---|---|---|
| All Ferroli models | — | Possible |
Frequently Asked Questions
Replace the fan motor assembly if bearings are worn or motor is not running. According to the technical documentation, this is the first check on the list for F22.
F22 is not classified as a high-severity fault, so the boiler can be reset once. If F22 comes back, stop resetting: the underlying cause is still there and needs a qualified heating engineer.