Blocked circulation pump fault
The 60 error code on Immergas boilers indicates blocked circulation pump fault.
Immergas 60 means: blocked circulation pump fault. The usual causes are the circulation pump is stopped due to one of the following causes: impeller blocked, electrical fault, if the block or the anomaly persists it is necessary to call an authorized company (for example the or immergas) it is possible to verify this anomaly only in the list of errors present in the "information" menu. You can safely reset the boiler once — if 60 returns, do not keep resetting. A qualified heating engineer should diagnose the root cause.
What Does 60 Mean
The 60 code is shown by the boiler’s control board when it detects blocked circulation pump fault. The boiler then stops instead of continuing to run in that condition: the code is the appliance reporting a problem, not proof that the boiler is broken.
| What you see on the boiler |
|---|
| The display shows 60 and the boiler stops until the fault is cleared |
Common Causes
Causes documented in the Immergas service literature published by centriassistenza.org, cross-checked against the manufacturer’s fault-code table.
| Cause |
|---|
| The circulation pump is stopped due to one of the following causes: Impeller blocked, electrical fault |
| If the block or the anomaly persists it is necessary to call an authorized company (for example the |
| Immergas) It is possible to verify this anomaly only in the list of errors present in the "Information" menu |
Safety Warning
60 involves electrical or pressure-related components. Do not attempt repairs without proper qualifications. Ensure the boiler is electrically isolated before any inspection. If you notice water leaks, unusual sounds, or pressure anomalies, contact a qualified heating engineer immediately.
Parts & Prices
Prices shown are indicative. Actual prices and availability vary by region.
How to Fix It
Try to unlock the circulation pump as described in the relevant paragraph. If normal conditions are restored, the boiler starts again without needing to be reset
Try to unblock the circulation pump as described in the relevant paragraph. If normal conditions are restored, the appliance restarts without the need to be reset
Refer to the Immergas service documentation for the detailed procedure. Only a qualified engineer should carry out these repairs.
Diagnostic Tools
TroubleAtlas Score
What Is the TroubleAtlas Score?
Every boiler model is independently evaluated and scored by TroubleAtlas across 6 dimensions: reliability, efficiency, parts availability, service network, value for money, and user satisfaction. The score helps you compare models and make informed decisions when choosing a new boiler.
See All Boiler Scores →Boiler Breakdown Cover
Boiler Breakdown Cover
Protect against unexpected repair costs. Cover plans include annual service, emergency callouts within 24 hours, and full parts replacement. Compare plans side by side and choose the level of protection that fits your home and budget.
Coverage Plans — Coming SoonConsidering a New Heating System
Considering a New Heating System?
If your boiler or heat pump is over 10 years old, replacing it with a modern condensing boiler or air-source heat pump could save you up to 30% on energy bills and significantly reduce your carbon footprint.
Compare Heating System Prices →
YouTube Channel
Watch the fixes. Follow the channel.
Step-by-step boiler repair guides, equipment reviews, and heating system comparisons from qualified engineers.
New fixes every weekFix in 5
Quick fixes for common boiler faults explained in under 5 minutes
Boiler Comparator
Side-by-side comparisons of popular boiler models
Boiler Reviews
Independent reviews with TroubleAtlas Score ratings
Find a Specialist
Don’t fix it alone. Find a trusted heating engineer near you.
TroubleAtlas connects you with vetted local heating professionals who can inspect, diagnose and repair your boiler safely — no guesswork, no unnecessary call-outs.
Local heating professionals are coming to your area
We’re onboarding Gas Safe registered and licensed HVAC engineers city by city. Check back soon, or search above to see current availability.
TroubleAtlas Pro
Get cited by AI. Get found by customers.
TroubleAtlas Pro puts your business in front of homeowners searching for exactly this fault, and structures your listing so AI assistants can cite you as a trusted source.
- ✓ Appear on error code pages viewed by thousands of homeowners
- ✓ AI assistants cite your listing as a verified local specialist
- ✓ Receive direct leads with customer name and contact details
- ✓ TroubleAtlas Certified badge for your marketing materials
Affected Models
Immergas models that can display fault code 60:
| Model Family | Output Range | Frequency |
|---|---|---|
| All Immergas models | — | Possible |
Frequently Asked Questions
Try to unlock the circulation pump as described in the relevant paragraph. If normal conditions are restored, the boiler starts again without needing to be reset. According to the technical documentation, this is the first check on the list for 60.
60 is not classified as a high-severity fault, so the boiler can be reset once. If 60 comes back, stop resetting: the underlying cause is still there and needs a qualified heating engineer.