i30
What code i30 means on a Electrolux dishwashers, what causes it, and which part to check first.
● SEVERITY: HIGH
Electrolux i30 means: The float sensor of the "Aqua-Stop" system has sent a signal indicating a leak. The documented cause is: i30 code or three blinks of an indicator mean that water leakage protection system has reacted. To be more precise, the water got into the drip tray, the float has triggered and a valve in the Aquastop system…
What i30 means
The float sensor of the "Aqua-Stop" system has sent a signal indicating a leak
The display shows i30 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by applianceaid.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| i30 code or three blinks of an indicator mean that water leakage protection system has reacted |
| To be more precise, the water got into the drip tray, the float has triggered and a valve in the Aquastop system opened the water supply |
| To eliminate this error, it is necessary to drain the water from the tray and find what is leaking |
| Also, you can just drain the water and bring the float out of the water position by tilting a dishwasher |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. The heating element and the wash water can stay hot long after the cycle ends.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does i30 mean on a Electrolux?
The float sensor of the "Aqua-Stop" system has sent a signal indicating a leak The documented cause is: i30 code or three blinks of an indicator mean that water leakage protection system has reacted. To be more precise, the water got into the drip tray, the float has triggered and a valve in the Aquastop system opened the water supply. To eliminate this error, it is necessary to drain the water from the tray and find what is leaking. Also, you can just drain the water and bring the float out of the water position by tilting a dishwasher
Can I fix i30 myself?
It depends on the part involved: i30 code or three blinks of an indicator mean that water leakage protection system has reacted. To be more precise, the water got into the drip tray, the float has triggered and a valve in the Aquastop system opened the water supply. To eliminate this error, it is necessary to drain the water from the tray and find what is leaking. Also, you can just drain the water and bring the float out of the water position by tilting a dishwasher Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Electrolux use other codes on this appliance?
Yes: we document 20 other codes for Electrolux on this dishwashers. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.