E52
What code E52 means on a Electrolux tumble dryers, what causes it, and which part to check first.
● SEVERITY: MEDIUM
Electrolux E52 means: Motor stopped or not starting. The documented cause is: Overloading can overheat the drive motor, causing a tripped thermal protector. Reduce the load and allow the motor to cool off for 30 minutes before restarting the dryer.
What E52 means
Motor stopped or not starting
The display shows E52 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by applianceaid.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| Overloading can overheat the drive motor, causing a tripped thermal protector |
| Reduce the load and allow the motor to cool off for 30 minutes before restarting the dryer |
| If the dryer won't restart, remove the load from the dryer and see if the drum turns freely by hand |
| If not, unplug the dryer and examine the drive system |
| Replace any damaged drive components |
| Check the motor wire harness |
| Reconnect any loose wires or replace the wire harness if damaged |
| If the drive system and wire harness are okay, then you may need to replace the drive motor |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine before removing any panel. Lint is flammable: never run a dryer with the filter removed, and clear the duct if the code points to airflow.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does E52 mean on a Electrolux?
Motor stopped or not starting The documented cause is: Overloading can overheat the drive motor, causing a tripped thermal protector. Reduce the load and allow the motor to cool off for 30 minutes before restarting the dryer. If the dryer won't restart, remove the load from the dryer and see if the drum turns freely by hand. If not, unplug the dryer and examine the drive system. Replace any damaged drive components. Check the motor wire harness. Reconnect any loose wires or replace the wire harness if damaged. If the drive system and wire harness are okay, then you may need to replace the drive motor
Can I fix E52 myself?
It depends on the part involved: Overloading can overheat the drive motor, causing a tripped thermal protector. Reduce the load and allow the motor to cool off for 30 minutes before restarting the dryer. If the dryer won't restart, remove the load from the dryer and see if the drum turns freely by hand. If not, unplug the dryer and examine the drive system. Replace any damaged drive components. Check the motor wire harness. Reconnect any loose wires or replace the wire harness if damaged. If the drive system and wire harness are okay, then you may need to replace the drive motor Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Electrolux use other codes on this appliance?
Yes: we document 46 other codes for Electrolux on this tumble dryers. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.