Electrolux EF8 — Stuck key on the user interface control

🌐 ▾
TUMBLE DRYERS FAULT CODE · ELECTROLUX

EF8

STUCK KEY ON THE USER INTERFACE CONTROL

What code EF8 means on a Electrolux tumble dryers, what causes it, and which part to check first.

● SEVERITY: MEDIUM
Electrolux Tumble dryers
In short

Electrolux EF8 means: Stuck key on the user interface control. The documented cause is: Push on all the buttons to try to free the stuck key. If you can't free the stuck key, replace the user interface control

01

What EF8 means

Stuck key on the user interface control

WHAT YOU SEE ON THE APPLIANCE

The display shows EF8 and the machine stops until the fault is cleared.

02

What the technical documentation says

Causes documented in the technical source published by applianceaid.com

DOCUMENTED CAUSE OR CHECK
Push on all the buttons to try to free the stuck key
If you can't free the stuck key, replace the user interface control
03

Replacement parts

06

Tools you'll need

04

Before you open anything

!

Unplug the machine before removing any panel. Lint is flammable: never run a dryer with the filter removed, and clear the duct if the code points to airflow.

05

What to check, in order

From the quickest check to the one that needs a technician.

1
Unplug the machine.
2
Clean the lint filter and the condenser — lint is the single most common cause.
3
Check the exhaust duct is clear along its whole length.
4
Check the door closes properly and the drum turns freely by hand.
5
If the fault returns, the part named above needs testing with a multimeter.
Appliance technician checking wiring and connections with a multimeter
07

Find a specialist

08

TroubleAtlas Pro

09

TroubleAtlas Certified

The official TroubleAtlas Score seal

What is the TroubleAtlas Score?

Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.

See all appliance scores →
10

TA YouTube Channel

11

Frequently asked questions

What does EF8 mean on a Electrolux?

Stuck key on the user interface control The documented cause is: Push on all the buttons to try to free the stuck key. If you can't free the stuck key, replace the user interface control

Can I fix EF8 myself?

It depends on the part involved: Push on all the buttons to try to free the stuck key. If you can't free the stuck key, replace the user interface control Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.

Does Electrolux use other codes on this appliance?

Yes: we document 46 other codes for Electrolux on this tumble dryers. They are listed at the bottom of this page, each with its own meaning.

Does the same code mean the same thing on other brands?

Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.

12

Other Electrolux codes

Written by TroubleAtlas Technical Team · Last verified: · How we verify — methodology · Sources: applianceaid.com
Scroll to Top