Er:08
What code Er:08 means on a Bosch washing machines, what causes it, and which part to check first.
● SEVERITY: MEDIUM
Bosch Er:08 means: Heating time exceeded - heater doesn't turn off. The documented cause is: Unplug the washer and check the heater for visible damage. A damaged heater could be shorting out to the metal cabinet, causing the element to heat constantly. Replace the heater if damaged.
What Er:08 means
Heating time exceeded - heater doesn't turn off
The display shows Er:08 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by applianceaid.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| Unplug the washer and check the heater for visible damage |
| A damaged heater could be shorting out to the metal cabinet, causing the element to heat constantly |
| Replace the heater if damaged |
| If the heater is okay, replace the control module because the relay that controls the heater is likely stuck in the On position |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. Water and mains electricity sit centimetres apart inside a washing machine. If the drum still holds water, drain it from the filter first — it can be scalding.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does Er:08 mean on a Bosch?
Heating time exceeded - heater doesn't turn off The documented cause is: Unplug the washer and check the heater for visible damage. A damaged heater could be shorting out to the metal cabinet, causing the element to heat constantly. Replace the heater if damaged. If the heater is okay, replace the control module because the relay that controls the heater is likely stuck in the On position
Can I fix Er:08 myself?
It depends on the part involved: Unplug the washer and check the heater for visible damage. A damaged heater could be shorting out to the metal cabinet, causing the element to heat constantly. Replace the heater if damaged. If the heater is okay, replace the control module because the relay that controls the heater is likely stuck in the On position Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Bosch use other codes on this appliance?
Yes: we document 20 other codes for Bosch on this washing machines. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.