Er:14
What code Er:14 means on a Bosch washing machines, what causes it, and which part to check first.
● SEVERITY: LOW
Bosch Er:14 means: Overfill level reached. The documented cause is: If the washer is not overfilled, the water level pressure switch is likely defective and will need to be replaced. If the washer is overfilled, shut off the water supply faucets behind the washer.
What Er:14 means
Overfill level reached
The display shows Er:14 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by applianceaid.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| If the washer is not overfilled, the water level pressure switch is likely defective and will need to be replaced |
| If the washer is overfilled, shut off the water supply faucets behind the washer |
| The drain pump runs continuously when this code is displayed and should pump out the water |
| Unplug the washer and open the water supply valves |
| If the washer fills when the electrical power is disconnected, replace the water inlet valve assembly |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. Water and mains electricity sit centimetres apart inside a washing machine. If the drum still holds water, drain it from the filter first — it can be scalding.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does Er:14 mean on a Bosch?
Overfill level reached The documented cause is: If the washer is not overfilled, the water level pressure switch is likely defective and will need to be replaced. If the washer is overfilled, shut off the water supply faucets behind the washer. The drain pump runs continuously when this code is displayed and should pump out the water. Unplug the washer and open the water supply valves. If the washer fills when the electrical power is disconnected, replace the water inlet valve assembly
Can I fix Er:14 myself?
It depends on the part involved: If the washer is not overfilled, the water level pressure switch is likely defective and will need to be replaced. If the washer is overfilled, shut off the water supply faucets behind the washer. The drain pump runs continuously when this code is displayed and should pump out the water. Unplug the washer and open the water supply valves. If the washer fills when the electrical power is disconnected, replace the water inlet valve assembly Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Bosch use other codes on this appliance?
Yes: we document 20 other codes for Bosch on this washing machines. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.