E57
What code E57 means on a Frigidaire washing machines, what causes it, and which part to check first.
● SEVERITY: HIGH
Frigidaire E57 means: High current on inverter. The documented cause is: Unplug the washer and remove the drive belt. Spin the motor pulley. If it doesn't spin freely, replace, the drive motor.
What E57 means
High current on inverter
The display shows E57 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by applianceaid.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| Unplug the washer and remove the drive belt |
| Spin the motor pulley |
| If it doesn't spin freely, replace, the drive motor |
| If the motor spins freely, rotate the large drive pulley on the back of the washer tub to check the spin bearing |
| If the pulley doesn't spin freely, the outer tub and spin basket usually need to be replaced because a spin bearing failed |
| If the spin bearing is sound, check the resistance of the motor windings for a reading between 4 and 6 ohms |
| If the motor has failed, replace it |
| If the motor is sound, the speed control board usually needs to be replaced |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. Water and mains electricity sit centimetres apart inside a washing machine. If the drum still holds water, drain it from the filter first — it can be scalding.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does E57 mean on a Frigidaire?
High current on inverter The documented cause is: Unplug the washer and remove the drive belt. Spin the motor pulley. If it doesn't spin freely, replace, the drive motor. If the motor spins freely, rotate the large drive pulley on the back of the washer tub to check the spin bearing. If the pulley doesn't spin freely, the outer tub and spin basket usually need to be replaced because a spin bearing failed. If the spin bearing is sound, check the resistance of the motor windings for a reading between 4 and 6 ohms. If the motor has failed, replace it. If the motor is sound, the speed control board usually needs to be replaced
Can I fix E57 myself?
It depends on the part involved: Unplug the washer and remove the drive belt. Spin the motor pulley. If it doesn't spin freely, replace, the drive motor. If the motor spins freely, rotate the large drive pulley on the back of the washer tub to check the spin bearing. If the pulley doesn't spin freely, the outer tub and spin basket usually need to be replaced because a spin bearing failed. If the spin bearing is sound, check the resistance of the motor windings for a reading between 4 and 6 ohms. If the motor has failed, replace it. If the motor is sound, the speed control board usually needs to be replaced Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Frigidaire use other codes on this appliance?
Yes: we document 39 other codes for Frigidaire on this washing machines. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.