E6
What code E6 means on a GE washing machines, what causes it, and which part to check first.
● SEVERITY: MEDIUM
GE E6 means: Water level sensor is defective. The documented cause is: Unplug the washer and reconnect any loose wires on the water level sensor. Replace the wire harness if damaged. Test the water level sensor using the service test mode as described in the tech sheet.
What E6 means
Water level sensor is defective
The display shows E6 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by applianceaid.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| Unplug the washer and reconnect any loose wires on the water level sensor |
| Replace the wire harness if damaged |
| Test the water level sensor using the service test mode as described in the tech sheet. (The tech sheet is behind the lower front service panel |
| Unplug the washer before removing the lower front service panel to access the tech sheet.) If the water level sensor fails the test, replace it |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. Water and mains electricity sit centimetres apart inside a washing machine. If the drum still holds water, drain it from the filter first — it can be scalding.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does E6 mean on a GE?
Water level sensor is defective The documented cause is: Unplug the washer and reconnect any loose wires on the water level sensor. Replace the wire harness if damaged. Test the water level sensor using the service test mode as described in the tech sheet. (The tech sheet is behind the lower front service panel. Unplug the washer before removing the lower front service panel to access the tech sheet.) If the water level sensor fails the test, replace it
Can I fix E6 myself?
It depends on the part involved: Unplug the washer and reconnect any loose wires on the water level sensor. Replace the wire harness if damaged. Test the water level sensor using the service test mode as described in the tech sheet. (The tech sheet is behind the lower front service panel. Unplug the washer before removing the lower front service panel to access the tech sheet.) If the water level sensor fails the test, replace it Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does GE use other codes on this appliance?
Yes: we document 28 other codes for GE on this washing machines. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.