FH
What code FH means on a Whirlpool washing machines, what causes it, and which part to check first.
● SEVERITY: LOW
Whirlpool FH means: Fill fault no incoming water detected or fill taking too long. The documented cause is: Water tap closed or partially closed. Kinked or trapped inlet hose. Blocked inlet hose filter. Low mains water pressure. Failed inlet valve solenoid. AquaStop hose triggered or blocked.
What FH means
Fill fault no incoming water detected or fill taking too long
The display shows FH and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by whitegoodshelp.co.uk
| DOCUMENTED CAUSE OR CHECK |
|---|
| Water tap closed or partially closed |
| Kinked or trapped inlet hose |
| Blocked inlet hose filter |
| Low mains water pressure |
| Failed inlet valve solenoid |
| AquaStop hose triggered or blocked |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. Water and mains electricity sit centimetres apart inside a washing machine. If the drum still holds water, drain it from the filter first — it can be scalding.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does FH mean on a Whirlpool?
Fill fault no incoming water detected or fill taking too long The documented cause is: Water tap closed or partially closed. Kinked or trapped inlet hose. Blocked inlet hose filter. Low mains water pressure. Failed inlet valve solenoid. AquaStop hose triggered or blocked.
Can I fix FH myself?
It depends on the part involved: Water tap closed or partially closed. Kinked or trapped inlet hose. Blocked inlet hose filter. Low mains water pressure. Failed inlet valve solenoid. AquaStop hose triggered or blocked. Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Whirlpool use other codes on this appliance?
Yes: we document 17 other codes for Whirlpool on this washing machines. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.