Hisense washing machines fault codes
Every Hisense washing machines fault code we have documented, with what it means. Pick yours to see causes, checks and the parts involved.
● 13 codes documented
Hisense uses 13 fault codes on its washing machines, shown on the display when the machine stops — among them E1, E4, E6, E7, E8. Each one points to a specific part: on this page you find them all, with what they mean.
How to read the code on the display
On most Hisense appliances the code appears on the display when the cycle stops, or is spelled out by a sequence of blinking lights.
Write the code down before switching off: many machines clear it when unplugged, and without the code the fault has to be found from scratch.
Replacement parts
Tools you'll need
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
All Hisense codes
13 codes, in order. Click one to open its page.
| CODE | WHAT IT MEANS |
|---|---|
| E1 | Water fill error proper water level not reached within 20 minutes |
| E4 | Door lock error machine not detecting the door is closed and locked |
| E6 | Motor / motor communication fault main board and inverter board not communicating |
| E7 | Pressure switch / water level sensor fault |
| E8 | Communication error internal data communication fault |
| E9 | Overflow / water level too high |
| F01 | Water inlet error machine not getting enough water |
| F02 | Overflow error too much water detected in drum |
| F03 | Drainage error machine unable to drain |
| F04 | Heating error water not reaching target temperature |
| F05 | NTC / temperature sensor error |
| F06 | Motor error drum rotation problem |
| F15 | Outlet dry air error (washer dryer models) |