IE
What code IE means on a GE dishwashers, what causes it, and which part to check first.
● SEVERITY: MEDIUM
GE IE means: Water inlet error — inlet valve not operating correctly. The documented cause is: Inlet valve solenoid failure(common) — The solenoid coil that opens the inlet valve has burned out, preventing water from entering the dishwasher even with full supply pressure.
What IE means
Water inlet error — inlet valve not operating correctly
The display shows IE and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by easybear-appliancerepair.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| Inlet valve solenoid failure(common) — The solenoid coil that opens the inlet valve has burned out, preventing water from entering the dishwasher even with full supply pressure |
| Inlet valve stuck closed from scale buildup(occasional) — Hard water mineral deposits have cemented the valve mechanism shut |
| Professional Repair |
| Estimated Cost |
| Repair Time |
| 30-45 minutes |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. The heating element and the wash water can stay hot long after the cycle ends.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does IE mean on a GE?
Water inlet error — inlet valve not operating correctly The documented cause is: Inlet valve solenoid failure(common) — The solenoid coil that opens the inlet valve has burned out, preventing water from entering the dishwasher even with full supply pressure. · Inlet valve stuck closed from scale buildup(occasional) — Hard water mineral deposits have cemented the valve mechanism shut. · Professional Repair · Estimated Cost · Repair Time · 30-45 minutes
Can I fix IE myself?
It depends on the part involved: Inlet valve solenoid failure(common) — The solenoid coil that opens the inlet valve has burned out, preventing water from entering the dishwasher even with full supply pressure. · Inlet valve stuck closed from scale buildup(occasional) — Hard water mineral deposits have cemented the valve mechanism shut. · Professional Repair · Estimated Cost · Repair Time · 30-45 minutes Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does GE use other codes on this appliance?
Yes: we document 30 other codes for GE on this dishwashers. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.