E02
What code E02 means on a Beko dishwashers, what causes it, and which part to check first.
● SEVERITY: LOW
Beko E02 means: Water Fill Error. The documented cause is: Water supply valve under the sink not fully open · Kinked or clogged water supply hose · Clogged inlet screen/filter at the dishwasher's water valve · Failed water inlet valve solenoid
What E02 means
Water Fill Error
The display shows E02 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by easybear-appliancerepair.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| Water supply valve under the sink not fully open |
| Kinked or clogged water supply hose |
| Clogged inlet screen/filter at the dishwasher's water valve |
| Failed water inlet valve solenoid |
| Float switch stuck in "full" position (false overfill detection) |
| Low household water pressure |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. The heating element and the wash water can stay hot long after the cycle ends.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does E02 mean on a Beko?
Water Fill Error The documented cause is: Water supply valve under the sink not fully open · Kinked or clogged water supply hose · Clogged inlet screen/filter at the dishwasher's water valve · Failed water inlet valve solenoid · Float switch stuck in "full" position (false overfill detection) · Low household water pressure
Can I fix E02 myself?
It depends on the part involved: Water supply valve under the sink not fully open · Kinked or clogged water supply hose · Clogged inlet screen/filter at the dishwasher's water valve · Failed water inlet valve solenoid · Float switch stuck in "full" position (false overfill detection) · Low household water pressure Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Beko use other codes on this appliance?
Yes: we document 16 other codes for Beko on this dishwashers. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.