E08
What code E08 means on a Beko dishwashers, what causes it, and which part to check first.
● SEVERITY: HIGH
Beko E08 means: Circulation Pump / Wash Motor Error. The documented cause is: Jammed pump impeller (glass shard, bone, or seed stuck) · Failed pump motor (seized bearings or burned winding) · Start capacitor failure (motor hums but won't spin) · Control board motor driver failure
What E08 means
Circulation Pump / Wash Motor Error
The display shows E08 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by easybear-appliancerepair.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| Jammed pump impeller (glass shard, bone, or seed stuck) |
| Failed pump motor (seized bearings or burned winding) |
| Start capacitor failure (motor hums but won't spin) |
| Control board motor driver failure |
| Blocked wash pump intake (food debris) |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. The heating element and the wash water can stay hot long after the cycle ends.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does E08 mean on a Beko?
Circulation Pump / Wash Motor Error The documented cause is: Jammed pump impeller (glass shard, bone, or seed stuck) · Failed pump motor (seized bearings or burned winding) · Start capacitor failure (motor hums but won't spin) · Control board motor driver failure · Blocked wash pump intake (food debris)
Can I fix E08 myself?
It depends on the part involved: Jammed pump impeller (glass shard, bone, or seed stuck) · Failed pump motor (seized bearings or burned winding) · Start capacitor failure (motor hums but won't spin) · Control board motor driver failure · Blocked wash pump intake (food debris) Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Beko use other codes on this appliance?
Yes: we document 16 other codes for Beko on this dishwashers. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.