E1
What code E1 means on a Fisher & Paykel dishwashers, what causes it, and which part to check first.
● SEVERITY: HIGH
Fisher & Paykel E1 means: Water Fill Error. The documented cause is: Water supply valve closed or partially open · Kinked or crushed supply hose (common during installation or kitchen renovations) · Clogged inlet filter/screen · Inlet valve solenoid failure
What E1 means
Water Fill Error
The display shows E1 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by easybear-appliancerepair.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| Water supply valve closed or partially open |
| Kinked or crushed supply hose (common during installation or kitchen renovations) |
| Clogged inlet filter/screen |
| Inlet valve solenoid failure |
| Low household water pressure (below 14 PSI) |
| Flood switch tripped from previous leak (locks out water fill) |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. The heating element and the wash water can stay hot long after the cycle ends.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does E1 mean on a Fisher & Paykel?
Water Fill Error The documented cause is: Water supply valve closed or partially open · Kinked or crushed supply hose (common during installation or kitchen renovations) · Clogged inlet filter/screen · Inlet valve solenoid failure · Low household water pressure (below 14 PSI) · Flood switch tripped from previous leak (locks out water fill)
Can I fix E1 myself?
It depends on the part involved: Water supply valve closed or partially open · Kinked or crushed supply hose (common during installation or kitchen renovations) · Clogged inlet filter/screen · Inlet valve solenoid failure · Low household water pressure (below 14 PSI) · Flood switch tripped from previous leak (locks out water fill) Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Fisher & Paykel use other codes on this appliance?
Yes: we document 5 other codes for Fisher & Paykel on this dishwashers. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.