Hisense dishwashers fault codes
Every Hisense dishwashers fault code we have documented, with what it means. Pick yours to see causes, checks and the parts involved.
● 10 codes documented
Hisense uses 10 fault codes on its dishwashers, shown on the display when the machine stops — among them E1, E3, E4, E5, E6. Each one points to a specific part: on this page you find them all, with what they mean.
How to read the code on the display
On most Hisense appliances the code appears on the display when the cycle stops, or is spelled out by a sequence of blinking lights.
Write the code down before switching off: many machines clear it when unplugged, and without the code the fault has to be found from scratch.
Replacement parts
Tools you'll need
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
All Hisense codes
10 codes, in order. Click one to open its page.
| CODE | WHAT IT MEANS |
|---|---|
| E1 | Water Fill Timeout |
| E3 | Water Heating Fault |
| E4 | Overflow / Flood Detection |
| E5 | Wash Motor / Circulation Pump Error |
| E6 | Rinse Aid Dispenser Fault |
| E7 | Door Latch / Switch Error |
| E8 | Drying System Error |
| F1 | Control Board Self-Test Failure |
| F2 | Communication Error |
| F3 | Water Level Sensor Malfunction |