Whirlpool tumble dryers fault codes
Every Whirlpool tumble dryers fault code we have documented, with what it means. Pick yours to see causes, checks and the parts involved.
● 15 codes documented
Whirlpool uses 15 fault codes on its tumble dryers, shown on the display when the machine stops — among them AF, F1E1, F2E1, F2E5, F3E1. Each one points to a specific part: on this page you find them all, with what they mean.
How to read the code on the display
On most Whirlpool appliances the code appears on the display when the cycle stops, or is spelled out by a sequence of blinking lights.
Write the code down before switching off: many machines clear it when unplugged, and without the code the fault has to be found from scratch.
Replacement parts
Tools you'll need
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
All Whirlpool codes
15 codes, in order. Click one to open its page.
| CODE | WHAT IT MEANS |
|---|---|
| AF | Restricted airflow — exhaust vent blockage detected |
| F1E1 | Main electronic control board failure |
| F2E1 | Stuck key / user interface button jammed |
| F2E5 | Configuration error — control board mismatch |
| F3E1 | Exhaust thermistor open or shorted |
| F3E2 | Moisture sensor bar failure |
| F3E3 | Inlet thermistor open or shorted |
| F4E1 | Heating element relay stuck or failed |
| F4E3 | Gas valve relay failure (gas models only) |
| F4E4 | Heating element open circuit (electric models) |
| F5E1 | Door switch failure — door state cannot be verified |
| F6E1 | Communication error between main board and user interface |
| F6E2 | Communication error — no signal from main control board |
| L2 | Low line voltage — insufficient power supply |
| PF | Power failure — power was interrupted during a cycle |