Enter the size on your sidewall and a candidate size. See the diameter difference and the real-world price for your size, side by side.
Free, no sign-upRuns in your browser
Metric radial sizesPassenger-car tires
Real shop pricesBelow the calculator
Compare two tire sizes
Use the size printed on the tire sidewall or on the manufacturer's vehicle label. Standard metric radial passenger-car sizes are supported.
Calculated in your browser. This is a nominal geometry estimate, not an installation approval.
225/45R17
Original
—Diameter change
245/40R18
Candidate
Overall diameter, candidate—
Estimated actual speed—
Sends the candidate size to the comparator below — the same search, not a new one.
Important: matching diameter does not establish fitment. Check approved vehicle sizes, rim width, load and speed ratings, clearance, and local rules before changing tires.
How this tire size calculator works
A metric radial tire marking such as 225/45R17 uses a 225 mm nominal section width, 45% sidewall aspect ratio, and a 17-inch wheel rim. Changing the diameter changes how far the wheel travels per rotation, which can shift what the speedometer shows.
Show the formulas and a worked example
Sidewall height (mm) = width (mm) × aspect ratio ÷ 100 Overall diameter (mm) ≈ 25.4 × rim (in) + 2 × sidewall height Circumference (mm) ≈ π × diameter Revolutions per mile ≈ 1,609,344 ÷ circumference Estimated actual speed ≈ indicated speed × candidate diameter ÷ original diameter
225/45R17 has a 101.25 mm sidewall and an estimated diameter of 634.3 mm. Changing to 245/40R18 gives 653.2 mm. At an indicated 60 mph, the diameter ratio suggests roughly 61.79 mph actual, if the speedometer was calibrated to the original size. No fitment, load, or safety claim is implied.
Ready to buy? Find real tyre prices for your size
The search below is the same tyre comparator already live on TroubleAtlas — same shops, same prices, same affiliate links.
Tell me the size. Or which car you drive.
Can't find your vehicle? The size is written on the tyre sidewall — for example 205/55 R16. Enter it above and I'll show you the prices.
How we earn. When you buy from a shop we showed you, that shop pays us a commission. It costs you nothing extra and the price does not change. The order in which you see the offers always starts from the lowest price we know.
TroubleAtlas Technical Team — page last checked: 25 September 2026. The data comes from the price lists of affiliated shops, read again every night. Rules cited: Regulation (EU) 2020/740 on tyre labelling and Directive 2014/45/EU on roadworthiness tests. Our method.
TroubleAtlas Technical Team — this calculator and its formulas were checked on 20 November 2026. Commercial tyre prices shown above come from the shared comparator, with its own freshness note just above this one. Our method.
Before you change anything
A nominal size match is not a fitment approval. Read this before ordering a candidate size.
Frequently asked questions
Can I install the new tire size?
This tool cannot tell you that. A small nominal diameter difference does not prove that a size is approved or safe for a particular vehicle or wheel. Replacement tires also need suitable load and speed ratings, rim-width compatibility, adequate physical clearance and vehicle/manufacturer approval. Michelin advises checking approved replacement dimensions. Avoid interpreting the frequently quoted "±3%" geometry rule of thumb as an approval threshold: this calculator shows the measured percentage without declaring fitment.
What happens if the new tire is taller?
For the same wheel rotational speed, a nominally larger circumference covers more ground. If the speedometer was calibrated to the original tire and nothing else changes, the vehicle may travel faster than the indicated speed.
What does R17 mean in a tire size?
R means radial construction. 17 means the tire is designed for a wheel rim with a nominal 17-inch diameter. The width is in millimetres; the aspect ratio is a percentage.
Does this compare load ratings and fitment?
No. Load index, speed rating, tire construction, wheel offset, rim width, clearances, homologation and brand-specific measured specifications are outside this geometric comparison. Verify these separately.
Can I compare motorcycle, flotation or LT tire sizes?
Not reliably with this first version. It is intended for standard three-part metric radial passenger-car sizes only. Other tire systems require separate calculation and validation.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.