P0B55 — Hybrid/EV Battery Voltage Sense F Circuit: causes, fixes & cost | TroubleAtlas

🌐 ▾
The TroubleAtlas app on a phoneTROUBLEATLAS APP · FREEFREE APPDownload our free appDownload our free appOur shopping centre in your pocket: dozens of suppliers that deliver in your country, compared, department by department.Dozens of suppliers compared, in your country. Get it free Get it free
OBD-II · FAULT CODE
P0B55.

Hybrid/EV Battery Voltage Sense F Circuit Range/Performance

P0B55 — Hybrid/EV Battery Voltage Sense F Circuit Range/Performance. It is a medium-severity fault: you can usually keep driving for short distances. The most common cause is damaged wiring, corrosion or a loose connector in the circuit.

CAN YOU STILL DRIVE? YES, WITH CAUTION

"Not urgent today, but it won't fix itself either."

Car dashboard with warning lights on
SEVERITY
MEDIUM — YES, WITH CAUTION
OBD2 SCANNER
TROUBLEATLAS APP
01What it means & symptoms

P0B55 is a powertrain diagnostic trouble code. It identifies a fault related to Hybrid/EV Battery Voltage Sense F Circuit Range/Performance. The powertrain control module monitors this circuit or component continuously and sets P0B55 when the signal or value is outside the expected range, implausible or missing. This can affect engine performance, fuel economy or emissions and usually turns on the check-engine light. The base function may still work, but performance can be affected, so the fault should be diagnosed. Diagnosis generally means inspecting the related wiring, connectors and power/ground references, then verifying the component against specification with a scan tool.

  • Check-engine light illuminated
  • Possible rough running, reduced power or higher fuel consumption
  • Fault code stored in the control module
02Most likely causes
Ranked from field data — confirmed by ≥2 independent sources.
#Cause
01Damaged wiring, corrosion or a loose connector in the circuit
02Faulty sensor, actuator or component referenced by the code
03Open, short or high resistance in the circuit
04Poor power supply or ground reference to the component
05Failed control module
03Don't make this mistake first
temporarily if the vehicle is operating normally, but you should be cautious. The code indicates potential battery sensing issues, which could affect hybrid performance and fuel economy. If you experience power loss, warning lights, or the vehicle enters limp mode, it s best to avoid long journeys and seek professional diagnosis promptly. Continued driving without repairs could risk further damage to the battery system or cause safety concerns, especially if the fault degrades further.
04Step-by-step diagnosis
Guided procedure — from the quickest check to confirmation.
01
Check for other stored DTCs that may provide additional context or related faults
02
Inspect wiring and connectors related to the « F » circuit for visible damage, corrosion, or disconnection
03
Test the voltage sense circuit with a multimeter or oscilloscope to compare actual readings against manufacturer specifications
04
Evaluate the voltage sensors for proper operation, replacing any that are out of tolerance
05
Perform a diagnostic reset and conduct a drive cycle to see if the code reappears
06
If the fault persists, test the hybrid battery s « F » module or cell for internal faults or imbalance

Our departments

Everything you need, picked by us

13Technical Service Bulletins & recalls

No technical service bulletins or recalls currently reference P0B55. This section updates automatically when manufacturers publish related bulletins.

14Frequently asked questions
Can I keep driving with P0B55?

YES, WITH CAUTION — get it diagnosed as soon as possible.

Scroll to Top