An independent value score for the Ferrari 348 (1990–1995) — reliability, safety, cost, parts, upkeep and documentation. Owing nothing to the manufacturer.
Every figure on this Ferrari 348 (1990–1995) page is aggregated and cross-checked against more than 6.6 million real workshop operations, NHTSA records and OEM technical sources — and updated continuously. No invented estimates.
The Ferrari 348 (1990–1995) is powered by a 3.4L V8 engine. Use the sections below for verified fluids, battery, OEM tyres, the maintenance schedule, recommended parts and the most commonly reported OBD2 fault codes for this vehicle.
The transmission module detected a fault — check separate transmission codes.
Related codes: P0700
Misfire / Loss of cylinderMODERATE
Rough running, idle vibration, power loss.
Related codes: P0300
Thermostat: coolant temperature lowLOW
Thermostat stuck open — engine does not reach operating temperature.
Related codes: P0128
Battery/system voltage lowLOW
System voltage below 10V — check alternator, battery or wiring.
Related codes: P0562
P0011LOW
Check with an OBD2 scanner.
Related codes: P0011
💰 AVERAGE INDICATIVE COSTS
Prices may vary by area and workshop.
🔧
Full service
€ 120 – € 200
🛑
Full brake service
€ 180 – € 300
⚡
Spark plug replacement
€ 80 – € 140
📊
Electronic diagnosis
€ 40 – € 70
💵 WORKSHOP LABOUR RATES BY COUNTRY
Average independent-workshop hourly labour rates, to estimate repair costs in your country.
🇩🇪Germany€95/h
🇪🇸Spain€55/h
🇫🇷France€75/h
🇮🇹Italy€45/h
🇬🇧UK£80/h
🇺🇸USA$120/h
Reference rate
€45/h
Source: Eurostat 2024
💧 FLUIDS & LUBRICANTS
📋 RECALLS & TSB (7)
NHTSA 92V073000
Steering › Gear Box (Other Than Rack And Pinion)
Date: 18/05/1992
THE STEERING BOX EXTENSION FASTENERS WERE MANUFACTURED WITH INFERIOR MATERIAL.
NHTSA 92V072000
Steering › Steering Wheel/Handle Bar
Date: 18/05/1992
THE UPPER STEERING COLUMN LOCKNUT WAS MANUFACTURED WITH INFERIOR MATERIALS AND INFERIOR SELF-LOCKING PROPERTIES.
NHTSA 92V073000
Steering › Gear Box (Other Than Rack And Pinion)
Date: 18/05/1992
THE STEERING BOX EXTENSION FASTENERS WERE MANUFACTURED WITH INFERIOR MATERIAL.
NHTSA 92V072000
Steering › Steering Wheel/Handle Bar
Date: 18/05/1992
THE UPPER STEERING COLUMN LOCKNUT WAS MANUFACTURED WITH INFERIOR MATERIALS AND INFERIOR SELF-LOCKING PROPERTIES.
NHTSA 92V071000
Fuel System, Gasoline › Fuel Injection System
Date: 18/05/1992
THE ALUMINUM FUEL LINE FITTINGS ON CERTAIN FUEL INJECTION LINES CORRODE, CAUSING THE FUEL LINE FITTINGS TO BREAK.
NHTSA 98V250000
Seat Belts
Date: 09/10/1998
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE AUTOMATIC SEAT BELT SLIDER CAN BECOME JAMMED WHEN THE SLIDER TAPE SEPARATES FROM THE TAKE-UP REEL, ILLUMINATING THE SEAT BELT WARNING LIGHT. SHOULD SUCH A CONDITION OCCUR, THE BELT MUST BE POSITIONED AND FASTENED MANUALLY BY CONNECT…
NHTSA 98V250000
Seat Belts
Date: 09/10/1998
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE AUTOMATIC SEAT BELT SLIDER CAN BECOME JAMMED WHEN THE SLIDER TAPE SEPARATES FROM THE TAKE-UP REEL, ILLUMINATING THE SEAT BELT WARNING LIGHT. SHOULD SUCH A CONDITION OCCUR, THE BELT MUST BE POSITIONED AND FASTENED MANUALLY BY CONNECT…
3 owner complaints filed with the U.S. National Highway Traffic Safety Administration (NHTSA) for the Ferrari 348 across model years 1990–1995. These are real, verified reports submitted by vehicle owners.
Complaints by model year (most reported first)
Model year 19912
Model year 19901
Most reported components (all years)
Seat Belts3
Sample reports
THE FRONT AUTOMATIC SEAT BELT FAILED TO MOVE FORWARD WHEN THE DOOR WAS OPENED. PER THE DEALERSHIP, THIS PROBLEM WAS CAUSED BY A DEFECT IN THE MOTOR. THE DEALERSHIP REPLACED THE MOTOR. THERE WAS A RECALL (03V142000) FOR THE PASSIVE RE… (MY 1991)
AUTOMATIC SEATBELT ON DRIVERS SIDE DOES NOT WORK. IT WILL NOT RETRACT THE VEHICLE IS A 1991 FERRARI 348 TB. *AK (MY 1991)
CONSUMER COMPLAINED ABOUT AUTOMATIC SEAT BELT RESTRAINT PROBLEM. NEITHER DRIVER SIDE OR PASSENGER SIDE AUTOMATIC SEAT BELT WERE FUNCTIONING [PROPERLY. *AK (MY 1990)
Source: NHTSA complaints database (U.S. data.gov). Figures cover production years 1990–1995.
Frequently Asked Questions
Which OBD2 fault codes are commonly documented for the Ferrari 348 (1990–1995)?
Commonly documented OBD2 codes across many vehicles include: P0420, P0300, P0171. Find the full description, likely causes and estimated repair costs in the OBD2 Codes section on this page.
How often should the Ferrari 348 (1990–1995) be serviced?
Routine maintenance for the Ferrari 348 (1990–1995) typically includes an oil change every 6,000–9,000 miles (10,000–15,000 km), an air filter every 12,000–18,000 miles (20,000–30,000 km) and a brake inspection every 12,000 miles (20,000 km). Check the full plan with specific intervals in the Scheduled Maintenance section on this page.
Bookmark this page to consult it at the workshop or when buying parts. TroubleAtlas updates its technical data continuously — check back for new information on the Ferrari 348 (1990–1995).
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.