Every figure on this Suzuki Samurai (1985–1995) page is aggregated and cross-checked against more than 6.6 million real workshop operations, NHTSA records and OEM technical sources — and updated continuously. No invented estimates.
The Suzuki Samurai (1985–1995) is powered by a 1.3L I4 engine. Use the sections below for verified fluids, battery, OEM tyres, the maintenance schedule, recommended parts and the most commonly reported OBD2 fault codes for this vehicle.
The transmission module detected a fault — check separate transmission codes.
Related codes: P0700
Misfire / Loss of cylinderMODERATE
Rough running, idle vibration, power loss.
Related codes: P0300
Thermostat: coolant temperature lowLOW
Thermostat stuck open — engine does not reach operating temperature.
Related codes: P0128
Battery/system voltage lowLOW
System voltage below 10V — check alternator, battery or wiring.
Related codes: P0562
P0011LOW
Check with an OBD2 scanner.
Related codes: P0011
💰 AVERAGE INDICATIVE COSTS
Prices may vary by area and workshop.
🔧
Full service
€ 120 – € 200
🛑
Full brake service
€ 180 – € 300
⚡
Spark plug replacement
€ 80 – € 140
📊
Electronic diagnosis
€ 40 – € 70
💵 WORKSHOP LABOUR RATES BY COUNTRY
Average independent-workshop hourly labour rates, to estimate repair costs in your country.
🇩🇪Germany€95/h
🇪🇸Spain€55/h
🇫🇷France€75/h
🇮🇹Italy€45/h
🇬🇧UK£80/h
🇺🇸USA$120/h
Reference rate
€45/h
Source: Eurostat 2024
💧 FLUIDS & LUBRICANTS
📋 RECALLS & TSB (4)
NHTSA 95V103008
Seat Belts › Front › Buckle Assembly
Date: 24/05/1995
THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
NHTSA 95V103008
Seat Belts › Front › Buckle Assembly
Date: 24/05/1995
THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
NHTSA 95V103008
Seat Belts › Front › Buckle Assembly
Date: 24/05/1995
THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
NHTSA 95V103008
Seat Belts › Front › Buckle Assembly
Date: 24/05/1995
THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
44 owner complaints filed with the U.S. National Highway Traffic Safety Administration (NHTSA) for the Suzuki Samurai across model years 1985–1995. These are real, verified reports submitted by vehicle owners.
15 crash reports1 fire15 injuries
Complaints by model year (most reported first)
Model year 198820
Model year 19876
Model year 19865
Model year 19924
Model year 19913
Model year 19942
Model year 19902
Model year 19892
Most reported components (all years)
Seat Belts15
Suspension6
Tires5
Steering4
Seats3
Structure3
Sample reports
FRONT SEAT BELT LATCH BROKE. *DSH (MY 1988)
DRIVER WAS DRIVING IN THE RAIN WITH WINDSHIELD WIPER WORKING, THE PASSENGER'S SIDE WENT INTO ENGINE COMPARTMENT . PLEASE DESCRIBE . *AK (MY 1992)
WHEN REAR ENDED THE SEAT BACKS BROKE AND CAUSED FURTHER INJURIES. PLEASE DESCRIBE. TT (MY 1988)
THE OWNER CAN NOT TAKE THE TIRE OFF THE VEHICLE ,PROBLEMS WITH THE LUGS BOLTS. TT (MY 1992)
Source: NHTSA complaints database (U.S. data.gov). Figures cover production years 1985–1995.
Frequently Asked Questions
Does the Suzuki Samurai have any safety recalls?
Yes — 4 official NHTSA recall campaign(s) affect this model, mainly: SEAT BELTS:FRONT:BUCKLE ASSEMBLY. Check the recalls section for your exact year/VIN.
What does fault code P0300 mean on the Suzuki Samurai?
Random/Multiple Cylinder Misfire Detected This code is among the most documented for this model — tap it in the OBD2 section for the full step-by-step guide.
What does fault code P0128 mean on the Suzuki Samurai?
Coolant temperature below thermostat regulating temperature — thermostat stuck open or faulty This code is among the most documented for this model — tap it in the OBD2 section for the full step-by-step guide.
What does fault code P0011 mean on the Suzuki Samurai?
A Camshaft Position Timing Over-Advanced or System Performance (Bank 1) This code is among the most documented for this model — tap it in the OBD2 section for the full step-by-step guide.
Which OBD2 fault codes are commonly documented for the Suzuki Samurai (1985–1995)?
Commonly documented OBD2 codes across many vehicles include: P0420, P0300, P0171. Find the full description, likely causes and estimated repair costs in the OBD2 Codes section on this page.
How often should the Suzuki Samurai (1985–1995) be serviced?
Routine maintenance for the Suzuki Samurai (1985–1995) typically includes an oil change every 6,000–9,000 miles (10,000–15,000 km), an air filter every 12,000–18,000 miles (20,000–30,000 km) and a brake inspection every 12,000 miles (20,000 km). Check the full plan with specific intervals in the Scheduled Maintenance section on this page.
Found what you were looking for? Explore other Suzuki models in our database, compare tyre offers in your size, or search a specific fault code in the TroubleAtlas OBD2 database.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.