i10
What code i10 means on a Electrolux dishwashers, what causes it, and which part to check first.
● SEVERITY: LOW
Electrolux i10 means: The dishwasher is not filling: the required water level is not reached during the maximum time. The documented cause is: i10 error code or single blink of an indicator with a five-second delay informs that water can't enter a device. If in a minute storage tank is not filled with a certain amount of water, the problem appears.
What i10 means
The dishwasher is not filling: the required water level is not reached during the maximum time
The display shows i10 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by applianceaid.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| i10 error code or single blink of an indicator with a five-second delay informs that water can't enter a device |
| If in a minute storage tank is not filled with a certain amount of water, the problem appears |
| It can be caused by a closed water supply tap, a water supply hose bending or a clog in the filter that is located before the filling hose |
| Such reasons can be fixed independently and easily, without any difficulties |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. The heating element and the wash water can stay hot long after the cycle ends.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does i10 mean on a Electrolux?
The dishwasher is not filling: the required water level is not reached during the maximum time The documented cause is: i10 error code or single blink of an indicator with a five-second delay informs that water can't enter a device. If in a minute storage tank is not filled with a certain amount of water, the problem appears. It can be caused by a closed water supply tap, a water supply hose bending or a clog in the filter that is located before the filling hose. Such reasons can be fixed independently and easily, without any difficulties
Can I fix i10 myself?
It depends on the part involved: i10 error code or single blink of an indicator with a five-second delay informs that water can't enter a device. If in a minute storage tank is not filled with a certain amount of water, the problem appears. It can be caused by a closed water supply tap, a water supply hose bending or a clog in the filter that is located before the filling hose. Such reasons can be fixed independently and easily, without any difficulties Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Electrolux use other codes on this appliance?
Yes: we document 20 other codes for Electrolux on this dishwashers. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.