iB0
What code iB0 means on a Electrolux dishwashers, what causes it, and which part to check first.
● SEVERITY: HIGH
Electrolux iB0 means: The turbidity sensor is faulty. The documented cause is: iB0 error code or eleven indicator blinks signal that the sensor that determines the transparency of water is out of order. The breakage occurs if there is no data on the turbidity of water for 15-20 seconds.
What iB0 means
The turbidity sensor is faulty
The display shows iB0 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by applianceaid.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| iB0 error code or eleven indicator blinks signal that the sensor that determines the transparency of water is out of order |
| The breakage occurs if there is no data on the turbidity of water for 15-20 seconds |
| The most likely option is the need to replace the transparency sensor |
| The dishwasher stops all processes and waits for the moment when the connection is restored |
| The cause of the malfunction may be a malfunction of the module |
| The board must be diagnosed and replaced if needed |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. The heating element and the wash water can stay hot long after the cycle ends.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does iB0 mean on a Electrolux?
The turbidity sensor is faulty The documented cause is: iB0 error code or eleven indicator blinks signal that the sensor that determines the transparency of water is out of order. The breakage occurs if there is no data on the turbidity of water for 15-20 seconds. The most likely option is the need to replace the transparency sensor. The dishwasher stops all processes and waits for the moment when the connection is restored. The cause of the malfunction may be a malfunction of the module. The board must be diagnosed and replaced if needed
Can I fix iB0 myself?
It depends on the part involved: iB0 error code or eleven indicator blinks signal that the sensor that determines the transparency of water is out of order. The breakage occurs if there is no data on the turbidity of water for 15-20 seconds. The most likely option is the need to replace the transparency sensor. The dishwasher stops all processes and waits for the moment when the connection is restored. The cause of the malfunction may be a malfunction of the module. The board must be diagnosed and replaced if needed Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Electrolux use other codes on this appliance?
Yes: we document 20 other codes for Electrolux on this dishwashers. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.