E5H
What code E5H means on a Electrolux tumble dryers, what causes it, and which part to check first.
● SEVERITY: HIGH
Electrolux E5H means: TMotor voltage is too low (below 100 volts). The documented cause is: Unplug the dryer and check the wire harness connections between the drive motor and inverter board. Reconnect any loose wires or replace the wire harness if damaged.
What E5H means
TMotor voltage is too low (below 100 volts)
The display shows E5H and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by applianceaid.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| Unplug the dryer and check the wire harness connections between the drive motor and inverter board |
| Reconnect any loose wires or replace the wire harness if damaged |
| If the wire connections are okay, replace the inverter board |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine before removing any panel. Lint is flammable: never run a dryer with the filter removed, and clear the duct if the code points to airflow.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does E5H mean on a Electrolux?
TMotor voltage is too low (below 100 volts) The documented cause is: Unplug the dryer and check the wire harness connections between the drive motor and inverter board. Reconnect any loose wires or replace the wire harness if damaged. If the wire connections are okay, replace the inverter board
Can I fix E5H myself?
It depends on the part involved: Unplug the dryer and check the wire harness connections between the drive motor and inverter board. Reconnect any loose wires or replace the wire harness if damaged. If the wire connections are okay, replace the inverter board Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Electrolux use other codes on this appliance?
Yes: we document 46 other codes for Electrolux on this tumble dryers. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.