E68
What code E68 means on a Electrolux tumble dryers, what causes it, and which part to check first.
● SEVERITY: MEDIUM
Electrolux E68 means: Gas Valve Error (Gas Models Only). The documented cause is: Gas valve solenoid coils burned out (the coils weaken with age and fail to open the valve against spring pressure) · Igniter failure (the glow-bar igniter cracks or loses resistance)
What E68 means
Gas Valve Error (Gas Models Only)
The display shows E68 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by easybear-appliancerepair.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| Gas valve solenoid coils burned out (the coils weaken with age and fail to open the valve against spring pressure) |
| Igniter failure (the glow-bar igniter cracks or loses resistance) |
| Flame sensor malfunction (sensor cannot confirm ignition) |
| Gas supply pressure issue (low gas pressure at the appliance valve) |
| Gas supply shut off |
| How to diagnose and fix: |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine before removing any panel. Lint is flammable: never run a dryer with the filter removed, and clear the duct if the code points to airflow.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does E68 mean on a Electrolux?
Gas Valve Error (Gas Models Only) The documented cause is: Gas valve solenoid coils burned out (the coils weaken with age and fail to open the valve against spring pressure) · Igniter failure (the glow-bar igniter cracks or loses resistance) · Flame sensor malfunction (sensor cannot confirm ignition) · Gas supply pressure issue (low gas pressure at the appliance valve) · Gas supply shut off · How to diagnose and fix:
Can I fix E68 myself?
It depends on the part involved: Gas valve solenoid coils burned out (the coils weaken with age and fail to open the valve against spring pressure) · Igniter failure (the glow-bar igniter cracks or loses resistance) · Flame sensor malfunction (sensor cannot confirm ignition) · Gas supply pressure issue (low gas pressure at the appliance valve) · Gas supply shut off · How to diagnose and fix: Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Electrolux use other codes on this appliance?
Yes: we document 50 other codes for Electrolux on this tumble dryers. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.