E8C
What code E8C means on a Frigidaire tumble dryers, what causes it, and which part to check first.
● SEVERITY: HIGH
Frigidaire E8C means: Frequent high-limit thermostat trips. The documented cause is: The high limit thermostat trips if the dryer overheats. Clear any blockage in the exhaust vent. If the dryer heats constantly because a relay on the electronic control board is stuck, replace the electronic…
What E8C means
Frequent high-limit thermostat trips
The display shows E8C and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by applianceaid.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| The high limit thermostat trips if the dryer overheats |
| Clear any blockage in the exhaust vent |
| If the dryer heats constantly because a relay on the electronic control board is stuck, replace the electronic control board |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine before removing any panel. Lint is flammable: never run a dryer with the filter removed, and clear the duct if the code points to airflow.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does E8C mean on a Frigidaire?
Frequent high-limit thermostat trips The documented cause is: The high limit thermostat trips if the dryer overheats. Clear any blockage in the exhaust vent. If the dryer heats constantly because a relay on the electronic control board is stuck, replace the electronic control board
Can I fix E8C myself?
It depends on the part involved: The high limit thermostat trips if the dryer overheats. Clear any blockage in the exhaust vent. If the dryer heats constantly because a relay on the electronic control board is stuck, replace the electronic control board Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Frigidaire use other codes on this appliance?
Yes: we document 6 other codes for Frigidaire on this tumble dryers. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.