F08
What code F08 means on a GE tumble dryers, what causes it, and which part to check first.
● SEVERITY: MEDIUM
GE F08 means: Door switch stuck closed. The documented cause is: The door is not seen being opened after 5 consecutive completed cycles. The control expects to see the door opened after each completed cycle.
What F08 means
Door switch stuck closed
The display shows F08 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by applianceaid.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| The door is not seen being opened after 5 consecutive completed cycles |
| The control expects to see the door opened after each completed cycle |
| If the control sees the door closed for 5 consecutive cycles, the control assumes that the door switch is defective |
| Unplug the dryer and reconnect any loose wires on the door switch |
| Replace the wire harness if damaged |
| If the wires are okay, replace the door switch |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine before removing any panel. Lint is flammable: never run a dryer with the filter removed, and clear the duct if the code points to airflow.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does F08 mean on a GE?
Door switch stuck closed The documented cause is: The door is not seen being opened after 5 consecutive completed cycles. The control expects to see the door opened after each completed cycle. If the control sees the door closed for 5 consecutive cycles, the control assumes that the door switch is defective. Unplug the dryer and reconnect any loose wires on the door switch. Replace the wire harness if damaged. If the wires are okay, replace the door switch
Can I fix F08 myself?
It depends on the part involved: The door is not seen being opened after 5 consecutive completed cycles. The control expects to see the door opened after each completed cycle. If the control sees the door closed for 5 consecutive cycles, the control assumes that the door switch is defective. Unplug the dryer and reconnect any loose wires on the door switch. Replace the wire harness if damaged. If the wires are okay, replace the door switch Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does GE use other codes on this appliance?
Yes: we document 4 other codes for GE on this tumble dryers. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.