Kenmore F1 E1 — Motor relay stuck on the electronic control board

🌐 ▾
TUMBLE DRYERS FAULT CODE · KENMORE

F1 E1

MOTOR RELAY STUCK ON THE ELECTRONIC CONTROL BOARD

What code F1 E1 means on a Kenmore tumble dryers, what causes it, and which part to check first.

● SEVERITY: HIGH
Kenmore Tumble dryers
In short

Kenmore F1 E1 means: Motor relay stuck on the electronic control board. The documented cause is: Replace the electronic control board

01

What F1 E1 means

Motor relay stuck on the electronic control board

WHAT YOU SEE ON THE APPLIANCE

The display shows F1 E1 and the machine stops until the fault is cleared.

02

What the technical documentation says

Causes documented in the technical source published by applianceaid.com

DOCUMENTED CAUSE OR CHECK
Replace the electronic control board
03

Replacement parts

06

Tools you'll need

04

Before you open anything

!

Unplug the machine before removing any panel. Lint is flammable: never run a dryer with the filter removed, and clear the duct if the code points to airflow.

05

What to check, in order

From the quickest check to the one that needs a technician.

1
Unplug the machine.
2
Clean the lint filter and the condenser — lint is the single most common cause.
3
Check the exhaust duct is clear along its whole length.
4
Check the door closes properly and the drum turns freely by hand.
5
If the fault returns, the part named above needs testing with a multimeter.
Appliance technician checking wiring and connections with a multimeter
07

Find a specialist

08

TroubleAtlas Pro

09

TroubleAtlas Certified

The official TroubleAtlas Score seal

What is the TroubleAtlas Score?

Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.

See all appliance scores →
10

TA YouTube Channel

11

Frequently asked questions

What does F1 E1 mean on a Kenmore?

Motor relay stuck on the electronic control board The documented cause is: Replace the electronic control board

Can I fix F1 E1 myself?

It depends on the part involved: Replace the electronic control board Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.

Does Kenmore use other codes on this appliance?

Yes: we document 65 other codes for Kenmore on this tumble dryers. They are listed at the bottom of this page, each with its own meaning.

Does the same code mean the same thing on other brands?

Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.

12

Other Kenmore codes

Written by TroubleAtlas Technical Team · Last verified: · How we verify — methodology · Sources: applianceaid.com
Scroll to Top