E2
What code E2 means on a Beko washing machines, what causes it, and which part to check first.
● SEVERITY: MEDIUM
Beko E2 means: This is an open circuit error in the heater, in this case it is not heated to the set temperature, the washing water above 30 degrees can be checked empirically by placing your hand on the porthole. The documented cause is: TECHNICAL CHECK = 1 Disconnect one of the heater contacts and measure the resistance it should be 20-30 Ohm
What E2 means
This is an open circuit error in the heater, in this case it is not heated to the set temperature, the washing water above 30 degrees can be checked empirically by placing your hand on the porthole
The display shows E2 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by centriassistenza.org
| DOCUMENTED CAUSE OR CHECK |
|---|
| TECHNICAL CHECK = 1 Disconnect one of the heater contacts and measure the resistance it should be 20-30 Ohm |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. Water and mains electricity sit centimetres apart inside a washing machine. If the drum still holds water, drain it from the filter first — it can be scalding.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does E2 mean on a Beko?
This is an open circuit error in the heater, in this case it is not heated to the set temperature, the washing water above 30 degrees can be checked empirically by placing your hand on the porthole The documented cause is: TECHNICAL CHECK = 1 Disconnect one of the heater contacts and measure the resistance it should be 20-30 Ohm
Can I fix E2 myself?
It depends on the part involved: TECHNICAL CHECK = 1 Disconnect one of the heater contacts and measure the resistance it should be 20-30 Ohm Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Beko use other codes on this appliance?
Yes: we document 12 other codes for Beko on this washing machines. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.