Blomberg washing machines fault codes
Every Blomberg washing machines fault code we have documented, with what it means. Pick yours to see causes, checks and the parts involved.
● 9 codes documented
Blomberg uses 9 fault codes on its washing machines, shown on the display when the machine stops — among them H1, H11, H2, H3, H4. Each one points to a specific part: on this page you find them all, with what they mean.
How to read the code on the display
On most Blomberg appliances the code appears on the display when the cycle stops, or is spelled out by a sequence of blinking lights.
Write the code down before switching off: many machines clear it when unplugged, and without the code the fault has to be found from scratch.
Replacement parts
Tools you'll need
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
All Blomberg codes
9 codes, in order. Click one to open its page.
| CODE | WHAT IT MEANS |
|---|---|
| H1 | NTC thermistor open or short circuit |
| H11 | Motor or tachogenerator open circuit |
| H2 | Heater detected open circuit failed heating element |
| H3 | Heater detected stuck on / heater triac short circuit |
| H4 | Inlet valve triac short circuit |
| H5 | Pump open circuit failed drain pump or wiring fault |
| H6 | Motor triac short circuit |
| H7 | Pressure sensor failure |
| H8 | Tachometer / motor speed sensor fault |