E71
What code E71 means on a Frigidaire washing machines, what causes it, and which part to check first.
● SEVERITY: HIGH
Frigidaire E71 means: Heater temperature sensor error. The documented cause is: Unplug the washer and measure the resistance of the heater temperature sensor using a multimeter. It should measure around 4,800 ohms. If it doesn't, replace the heater.
What E71 means
Heater temperature sensor error
The display shows E71 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by applianceaid.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| Unplug the washer and measure the resistance of the heater temperature sensor using a multimeter |
| It should measure around 4,800 ohms |
| If it doesn't, replace the heater |
| If it does, check the wiring connections between the heater temperature sensor and the electronic control board |
| Reconnect any loose wires |
| Replace the wire harness if damaged |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. Water and mains electricity sit centimetres apart inside a washing machine. If the drum still holds water, drain it from the filter first — it can be scalding.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does E71 mean on a Frigidaire?
Heater temperature sensor error The documented cause is: Unplug the washer and measure the resistance of the heater temperature sensor using a multimeter. It should measure around 4,800 ohms. If it doesn't, replace the heater. If it does, check the wiring connections between the heater temperature sensor and the electronic control board. Reconnect any loose wires. Replace the wire harness if damaged
Can I fix E71 myself?
It depends on the part involved: Unplug the washer and measure the resistance of the heater temperature sensor using a multimeter. It should measure around 4,800 ohms. If it doesn't, replace the heater. If it does, check the wiring connections between the heater temperature sensor and the electronic control board. Reconnect any loose wires. Replace the wire harness if damaged Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Frigidaire use other codes on this appliance?
Yes: we document 39 other codes for Frigidaire on this washing machines. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.