Err2
What code Err2 means on a Haier washing machines, what causes it, and which part to check first.
● SEVERITY: LOW
Haier Err2 means: Drain fault water has failed to drain within the expected time. The documented cause is: Blocked pump filter (the most common cause). Kinked or blocked drain hose. Standpipe too high. Foreign object blocking the pump impeller. Failed drain pump motor. Wiring fault to drain pump.
What Err2 means
Drain fault water has failed to drain within the expected time
The display shows Err2 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by whitegoodshelp.co.uk
| DOCUMENTED CAUSE OR CHECK |
|---|
| Blocked pump filter (the most common cause). Kinked or blocked drain hose |
| Standpipe too high |
| Foreign object blocking the pump impeller |
| Failed drain pump motor |
| Wiring fault to drain pump |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. Water and mains electricity sit centimetres apart inside a washing machine. If the drum still holds water, drain it from the filter first — it can be scalding.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does Err2 mean on a Haier?
Drain fault water has failed to drain within the expected time The documented cause is: Blocked pump filter (the most common cause). Kinked or blocked drain hose. Standpipe too high. Foreign object blocking the pump impeller. Failed drain pump motor. Wiring fault to drain pump.
Can I fix Err2 myself?
It depends on the part involved: Blocked pump filter (the most common cause). Kinked or blocked drain hose. Standpipe too high. Foreign object blocking the pump impeller. Failed drain pump motor. Wiring fault to drain pump. Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Haier use other codes on this appliance?
Yes: we document 14 other codes for Haier on this washing machines. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.