F07
What code F07 means on a Hotpoint washing machines, what causes it, and which part to check first.
● SEVERITY: HIGH
Hotpoint F07 means: Pressure switch / water level fault level has dropped during cycle or is not reading correctly. The documented cause is: Failed pressure switch. Blocked or kinked pressure switch hose. Soap suds build-up. Actual water loss during cycle due to a leak. Wiring fault to pressure switch.
What F07 means
Pressure switch / water level fault level has dropped during cycle or is not reading correctly
The display shows F07 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by whitegoodshelp.co.uk
| DOCUMENTED CAUSE OR CHECK |
|---|
| Failed pressure switch |
| Blocked or kinked pressure switch hose |
| Soap suds build-up |
| Actual water loss during cycle due to a leak |
| Wiring fault to pressure switch |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. Water and mains electricity sit centimetres apart inside a washing machine. If the drum still holds water, drain it from the filter first — it can be scalding.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does F07 mean on a Hotpoint?
Pressure switch / water level fault level has dropped during cycle or is not reading correctly The documented cause is: Failed pressure switch. Blocked or kinked pressure switch hose. Soap suds build-up. Actual water loss during cycle due to a leak. Wiring fault to pressure switch.
Can I fix F07 myself?
It depends on the part involved: Failed pressure switch. Blocked or kinked pressure switch hose. Soap suds build-up. Actual water loss during cycle due to a leak. Wiring fault to pressure switch. Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Hotpoint use other codes on this appliance?
Yes: we document 15 other codes for Hotpoint on this washing machines. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.