E05
What code E05 means on a Midea washing machines, what causes it, and which part to check first.
● SEVERITY: HIGH
Midea E05 means: Door Lock Error (Front-Load Models). The documented cause is: Door not fully closed (clothing caught in the gasket) · Failed door lock motor/solenoid · Broken door latch or strike · Wiring issue between the lock assembly and control board
What E05 means
Door Lock Error (Front-Load Models)
The display shows E05 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by easybear-appliancerepair.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| Door not fully closed (clothing caught in the gasket) |
| Failed door lock motor/solenoid |
| Broken door latch or strike |
| Wiring issue between the lock assembly and control board |
| Door hinge sagging (common on budget models after a few years) |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. Water and mains electricity sit centimetres apart inside a washing machine. If the drum still holds water, drain it from the filter first — it can be scalding.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does E05 mean on a Midea?
Door Lock Error (Front-Load Models) The documented cause is: Door not fully closed (clothing caught in the gasket) · Failed door lock motor/solenoid · Broken door latch or strike · Wiring issue between the lock assembly and control board · Door hinge sagging (common on budget models after a few years)
Can I fix E05 myself?
It depends on the part involved: Door not fully closed (clothing caught in the gasket) · Failed door lock motor/solenoid · Broken door latch or strike · Wiring issue between the lock assembly and control board · Door hinge sagging (common on budget models after a few years) Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Midea use other codes on this appliance?
Yes: we document 6 other codes for Midea on this washing machines. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.