F60
What code F60 means on a Whirlpool washing machines, what causes it, and which part to check first.
● SEVERITY: MEDIUM
Whirlpool F60 means: F63: signals control board problem. The documented cause is: The plug is not inserted into the wall socket far enough to make contact. · No power in the home network. · The wash cycle does not start. · The washing machine door is not closed correctly.
What F60 means
F63: signals control board problem.
The display shows F60 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by centriassistenza.org
| DOCUMENTED CAUSE OR CHECK |
|---|
| The plug is not inserted into the wall socket far enough to make contact |
| No power in the home network |
| The wash cycle does not start |
| The washing machine door is not closed correctly |
| The ON/OFF button has not been pressed |
| The START/PAUSE button has not been pressed |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. Water and mains electricity sit centimetres apart inside a washing machine. If the drum still holds water, drain it from the filter first — it can be scalding.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does F60 mean on a Whirlpool?
F63: signals control board problem. The documented cause is: The plug is not inserted into the wall socket far enough to make contact. · No power in the home network. · The wash cycle does not start. · The washing machine door is not closed correctly. · The ON/OFF button has not been pressed. · The START/PAUSE button has not been pressed.
Can I fix F60 myself?
It depends on the part involved: The plug is not inserted into the wall socket far enough to make contact. · No power in the home network. · The wash cycle does not start. · The washing machine door is not closed correctly. · The ON/OFF button has not been pressed. · The START/PAUSE button has not been pressed. Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Whirlpool use other codes on this appliance?
Yes: we document 18 other codes for Whirlpool on this washing machines. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.