Toyota Camry 2000 — Technical Guide, Fault Codes & Maintenance
2.2L I4 • Gasoline
© Wikimedia Commons CC BY-SA
Every figure on this Toyota Camry 2000 page is aggregated and cross-checked against more than 6.6 million real workshop operations, NHTSA records and OEM technical sources — and updated continuously. No invented estimates.
The Toyota Camry 2000 uses Toyota Genuine 5W-30 engine oil. Its battery is group 35 (BCI), rated at 575A cold-cranking amps. It is powered by a 2.2L I4 engine. Use the sections below for verified fluids, battery, OEM tyres, the maintenance schedule, recommended parts and the most commonly reported OBD2 fault codes for this vehicle.
Engine temperature over limits — check coolant level, thermostat and radiator.
Related codes: P0217
ECU detects insufficient oil pressure — check oil level and sensor.
Related codes: P0522
Oil pressure below critical threshold — stop the engine and check immediately.
Related codes: P0524
Faulty ECU processor — requires specialist workshop diagnosis.
Related codes: P0606
Throttle actuator motor circuit open — loss of throttle response.
Related codes: P2100
Prices may vary by area and workshop.
Average independent-workshop hourly labour rates, to estimate repair costs in your country.
Recommended tools and accessories for the Toyota Camry 2000 — OBD2 scanners, battery testers, oils and tool kits — from our country partner.
⚠️ Specific tyre size not yet verified for this vehicle.
Enter the size shown in the logbook or on the tyre sidewall to search compatible offers.
Run a workshop? Join the TroubleAtlas Professional Program: turn this technical encyclopedia into local customers and manage your shop with built-in tools.
- ✓Your workshop suggested to nearby users among the recommended local workshops
- ✓Enhanced local GEO visibility
- ✓AI reception & booking desk
- ✓Workshop management tools
- ✓Used-equipment marketplace (buy/sell among professionals)
35
All documented fault codes for this vehicle
The most documented diagnostic codes for this model, by system and severity. Tap a code for the full guide.
60 warning lights classified by urgency. Appears on your vehicle? Check the urgency level.
Show all dashboard warning lights
518 owner complaints filed with the U.S. National Highway Traffic Safety Administration (NHTSA) for the Toyota Camry 2000. These are real, verified reports submitted by vehicle owners.
DURING NORMAL USE, THE BOLT ATTACHING THE SEAT BACK OF THE FRONT PASSENGER SEAT TO SEAT BASE FELL OUT. THE BOLT THREADS SHOWED SIGNS OF WEAR AND DAMAGE AND WAS FOUND IN THE BACK SEAT FOOT WELL. THE CONDITION WAS DISCOVERED BECAUSE THE…
THERE'S AN AREA ON REAR WINDOW THAT DOES NOT CLEAR WHEN DEFROSTER IS ON. THIS AFFECTS VISION FROM THIS SPACE. THIS PROBLEM ALMOST CAUSED AN ACCIDENT. PLEASE PROVIDE ANY FURTHER INFORMATION.*AK
THIS ITEM IS NOT A TOTAL FAILURE YET BUT IS HEADED IN THAT DIRECTION. THE POWER STEERING HOSE IS LEAKING FLUID WHERE IT JOINS THE RACK AND PINION STEERING ASSEMBLY. WHEN THE FLUID ALL LEAKS OUT I WILL HAVE NO POWER ASSIST IN MY STEERI…
TOYOTA'S REGIONAL TECH. REP TELLS ME HE KNOWS OF NO OTHER SIMILAR PROBLEMS. OBVIOUSLY, FROM READING THIS WEBSITE THAT IS NOT TRUE. I AM PURSUING THE LEMON LAW IN MY STATE.
Source: NHTSA complaints database (U.S. data.gov). Figures shown for model year 2000.
Manufacturer torque values for safety-critical fasteners on the Toyota Camry 2000.
| Component | System | Torque |
|---|---|---|
| Camshaft R&R — Cam Phaser Bolt | engine | 65.0 Nm |
| Camshaft R&R — Camshaft Pulley Bolt | engine | 74.0 Nm |
| Timing Belt Kit — Camshaft Sprocket Bolt | engine | 80.0 Nm |
| Timing Belt Tensioner — Camshaft Sprocket Bolt | engine | 75.0 Nm |
| Timing Belt — Camshaft Position Sensor | engine | 10.0 Nm |
| Timing Belt — Camshaft Sprocket Bolt | engine | 125.0 Nm |
| Variable Valve Timing Actuator — Cam Phaser Bolt | engine | 65.0 Nm |
| Catalytic Converter - California — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| Catalytic Converter - California — Flange Bolts | exhaust | 50.0 Nm |
| Catalytic Converter - Direct Fit — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| Catalytic Converter - Direct Fit — Flange Bolts | exhaust | 50.0 Nm |
| Catalytic Converter - Universal — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| Catalytic Converter - Universal — Flange Bolts | exhaust | 50.0 Nm |
| O2 Sensor - Downstream — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| O2 Sensor - Downstream — Flange Bolts | exhaust | 50.0 Nm |
| O2 Sensor - Upstream — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| O2 Sensor - Upstream — Flange Bolts | exhaust | 50.0 Nm |
| O2 Sensors - All — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| O2 Sensors - All — Flange Bolts | exhaust | 50.0 Nm |
| AC Evaporator — AC Line Fittings | hvac | 20.0 Nm |
Frequently Asked Questions
What is the right battery for the Toyota Camry 2000?
What engine oil should I use on the Toyota Camry 2000?
Which OBD2 fault codes are commonly documented for the Toyota Camry 2000?
How often should the Toyota Camry 2000 be serviced?
Have a specific fault code on your Toyota Camry 2000? Search the code in the OBD2 section of this page or use the full TroubleAtlas DTC database. Need tyres? Compare prices and compatible sizes in the TroubleAtlas comparator.
