Toyota Camry 2011 — Verified Specs, Fluids & OBD2
2.4L I4 • Gasoline
© Wikimedia Commons CC BY-SA
Every figure on this Toyota Camry 2011 page is aggregated and cross-checked against more than 6.6 million real workshop operations, NHTSA records and OEM technical sources — and updated continuously. No invented estimates.
The Toyota Camry 2011 uses Toyota Genuine 5W-30 engine oil. Its battery is group 35 (BCI), rated at 500A cold-cranking amps. It is powered by a 2.4L I4 engine. Use the sections below for verified fluids, battery, OEM tyres, the maintenance schedule, recommended parts and the most commonly reported OBD2 fault codes for this vehicle.
Engine temperature over limits — check coolant level, thermostat and radiator.
Related codes: P0217
ECU detects insufficient oil pressure — check oil level and sensor.
Related codes: P0522
Oil pressure below critical threshold — stop the engine and check immediately.
Related codes: P0524
Faulty ECU processor — requires specialist workshop diagnosis.
Related codes: P0606
Throttle actuator motor circuit open — loss of throttle response.
Related codes: P2100
Prices may vary by area and workshop.
Average independent-workshop hourly labour rates, to estimate repair costs in your country.
Recommended tools and accessories for the Toyota Camry 2011 — OBD2 scanners, battery testers, oils and tool kits — from our country partner.
⚠️ Specific tyre size not yet verified for this vehicle.
Enter the size shown in the logbook or on the tyre sidewall to search compatible offers.
Run a workshop? Join the TroubleAtlas Professional Program: turn this technical encyclopedia into local customers and manage your shop with built-in tools.
- ✓Your workshop suggested to nearby users among the recommended local workshops
- ✓Enhanced local GEO visibility
- ✓AI reception & booking desk
- ✓Workshop management tools
- ✓Used-equipment marketplace (buy/sell among professionals)
35
All documented fault codes for this vehicle
The most documented diagnostic codes for this model, by system and severity. Tap a code for the full guide.
60 warning lights classified by urgency. Appears on your vehicle? Check the urgency level.
Show all dashboard warning lights
617 owner complaints filed with the U.S. National Highway Traffic Safety Administration (NHTSA) for the Toyota Camry 2011. These are real, verified reports submitted by vehicle owners.
MY CAR IS BURNING TOO MUCH OIL . I ASKED MY MECHANIC HE TOLD ME THERE IS PROBLEM OF ALL 2011 TOYOTA ( IT BURNING TOO MUCH OIL)
DURING THE FIRST HALF OF 2015 MY DRIVER'S SIDE SUN VISOR WOULD NOT STAY ALL THE WAY AND WAS ABOUT 15% OF THE WAY DOWN. WHILE THIS WAS IN MY LINE-OF-SIGHT IT REALLY DID NOT IMPEDE MY VISION OR ABILITY TO DRIVE. MID-2015 THE VISOR NO LON…
ENTERING THE HIGHWAY FROM AND ENTRANCE RAMP DURING RAINY WEATHER AND AS I TURN THE WHEEL THE VEHICLE BEGINS TO LOOSE CONTROL AND THE TRACTION LIGHT COMES ON AS I SLIDE SIDEWAYS OFF THE RAMP. THIS VEHICLE IS VERY DANGEROUS DUE TO THE STE…
TL*THE CONTACT OWNS A 2011 TOYOTA CAMRY. THE CONTACT STATED THAT THE VEHICLE WAS IN THE IDLE POSITION WHEN THE ACCELERATOR PEDAL SUDDENLY EXTENDED TO THE FLOORBOARD AND THE VEHICLE ACCELERATED. THE VEHICLE ACCELERATED UP TO 20 MPH AND TH…
Source: NHTSA complaints database (U.S. data.gov). Figures shown for model year 2011.
Manufacturer torque values for safety-critical fasteners on the Toyota Camry 2011.
| Component | System | Torque |
|---|---|---|
| Camshaft R&R — Cam Phaser Bolt | engine | 65.0 Nm |
| Camshaft R&R — Camshaft Pulley Bolt | engine | 74.0 Nm |
| Timing Belt Kit — Camshaft Sprocket Bolt | engine | 80.0 Nm |
| Timing Belt Tensioner — Camshaft Sprocket Bolt | engine | 75.0 Nm |
| Timing Belt — Camshaft Position Sensor | engine | 10.0 Nm |
| Timing Belt — Camshaft Sprocket Bolt | engine | 125.0 Nm |
| Variable Valve Timing Actuator — Cam Phaser Bolt | engine | 65.0 Nm |
| Catalytic Converter - California — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| Catalytic Converter - California — Flange Bolts | exhaust | 50.0 Nm |
| Catalytic Converter - Direct Fit — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| Catalytic Converter - Direct Fit — Flange Bolts | exhaust | 50.0 Nm |
| Catalytic Converter - Universal — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| Catalytic Converter - Universal — Flange Bolts | exhaust | 50.0 Nm |
| O2 Sensor - Downstream — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| O2 Sensor - Downstream — Flange Bolts | exhaust | 50.0 Nm |
| O2 Sensor - Upstream — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| O2 Sensor - Upstream — Flange Bolts | exhaust | 50.0 Nm |
| O2 Sensors - All — Exhaust Flange Bolts | exhaust | 45.0 Nm |
| O2 Sensors - All — Flange Bolts | exhaust | 50.0 Nm |
| AC Evaporator — AC Line Fittings | hvac | 20.0 Nm |
Frequently Asked Questions
What is the right battery for the Toyota Camry 2011?
What engine oil should I use on the Toyota Camry 2011?
Which OBD2 fault codes are commonly documented for the Toyota Camry 2011?
How often should the Toyota Camry 2011 be serviced?
Have a specific fault code on your Toyota Camry 2011? Search the code in the OBD2 section of this page or use the full TroubleAtlas DTC database. Need tyres? Compare prices and compatible sizes in the TroubleAtlas comparator.
