Condensation drain could be blocked, the air supply duct and flue needs checking for possible recirculation or blockage of flue gases
The F005 error code on Intergas boilers indicates condensation drain could be blocked, the air supply duct and flue needs checking for possible recirculation or blockage of flue gases.
Intergas F005 means: condensation drain could be blocked, the air supply duct and flue needs checking for possible recirculation or blockage of flue gases. The usual causes are blocked or partially blocked flue system, incorrect flue installation (too many bends, excessive length) or terminal guard blocked with debris or ice. A Gas Safe registered engineer should diagnose the root cause.
What Does F005 Mean
The F005 code is shown by the boiler’s control board when it detects condensation drain could be blocked, the air supply duct and flue needs checking for possible recirculation or blockage of flue gases. The boiler then stops instead of continuing to run in that condition: the code is the appliance reporting a problem, not proof that the boiler is broken.
| What you see on the boiler |
|---|
| The display shows F005 and the boiler stops until the fault is cleared |
Common Causes
Causes documented in 2 technical sources.
| Cause |
|---|
| Blocked or partially blocked flue system |
| incorrect flue installation (too many bends, excessive length) |
| terminal guard blocked with debris or ice |
| condensate drain blocked causing back-pressure in the flue |
| combustion issue — incorrect gas/air ratio |
Safety Warning
F005 is a gas-related fault. Never attempt to repair or adjust the gas valve, burner assembly, or flue system yourself. All gas work must be carried out by a Gas Safe registered engineer (UK) or licensed HVAC technician (US). Repeated resets after ignition failure can cause unburnt gas to accumulate inside the combustion chamber — this is a serious safety hazard. If you smell gas at any point, turn off the gas supply at the meter, open windows, leave the property, and call your gas emergency service immediately. Gas-related fault. Do not open the boiler casing or attempt repairs to the gas valve, burner, ignition or flue. Repeated resets are unsafe. Diagnosis and repair must be carried out by a Gas Safe registered engineer.
Parts & Prices
Prices shown are indicative. Actual prices and availability vary by region.
Step-by-Step Diagnosis
Visually inspect the flue terminal outside — check for blockages, birds' nests, or ice
Check the flue run — verify it is within the manufacturer's maximum length and number of bends
Perform a flue gas analysis — CO and CO2 levels should be within specification
Check the condensate drain — ensure it is not blocked
Verify the air intake is not obstructed (for room-sealed appliances)
Check for signs of flue gas spillage in the room (for open-flue appliances)
How to Fix It
Clear any flue blockage
correct the flue installation if it exceeds maximum length or bends
clear ice from the flue terminal (insulate external condensate pipe)
clear the condensate drain
if combustion analysis shows incorrect values, adjust the gas valve or service the burner
Refer to the Intergas service documentation for the detailed procedure. Only a qualified engineer should carry out these repairs.
Diagnostic Tools
TroubleAtlas Score
What Is the TroubleAtlas Score?
Every boiler model is independently evaluated and scored by TroubleAtlas across 6 dimensions: reliability, efficiency, parts availability, service network, value for money, and user satisfaction. The score helps you compare models and make informed decisions when choosing a new boiler.
See All Boiler Scores →Boiler Breakdown Cover
Boiler Breakdown Cover
Protect against unexpected repair costs. Cover plans include annual service, emergency callouts within 24 hours, and full parts replacement. Compare plans side by side and choose the level of protection that fits your home and budget.
Coverage Plans — Coming SoonConsidering a New Heating System
Considering a New Heating System?
If your boiler or heat pump is over 10 years old, replacing it with a modern condensing boiler or air-source heat pump could save you up to 30% on energy bills and significantly reduce your carbon footprint.
Compare Heating System Prices →
YouTube Channel
Watch the fixes. Follow the channel.
Step-by-step boiler repair guides, equipment reviews, and heating system comparisons from qualified engineers.
New fixes every weekFix in 5
Quick fixes for common boiler faults explained in under 5 minutes
Boiler Comparator
Side-by-side comparisons of popular boiler models
Boiler Reviews
Independent reviews with TroubleAtlas Score ratings
Find a Specialist
Don’t fix it alone. Find a trusted heating engineer near you.
TroubleAtlas connects you with vetted local heating professionals who can inspect, diagnose and repair your boiler safely — no guesswork, no unnecessary call-outs.
Local heating professionals are coming to your area
We’re onboarding Gas Safe registered and licensed HVAC engineers city by city. Check back soon, or search above to see current availability.
TroubleAtlas Pro
Get cited by AI. Get found by customers.
TroubleAtlas Pro puts your business in front of homeowners searching for exactly this fault, and structures your listing so AI assistants can cite you as a trusted source.
- ✓ Appear on error code pages viewed by thousands of homeowners
- ✓ AI assistants cite your listing as a verified local specialist
- ✓ Receive direct leads with customer name and contact details
- ✓ TroubleAtlas Certified badge for your marketing materials
Affected Models
Intergas models that can display fault code F005:
| Model Family | Output Range | Frequency |
|---|---|---|
| All Intergas models | — | Possible |
Frequently Asked Questions
Clear any flue blockage. According to the technical documentation, this is the first check on the list for F005.
F005 is classified as a high-severity fault: it involves gas, combustion or flue components. Do not keep resetting the boiler and do not attempt the repair yourself — call a Gas Safe registered engineer.