🌐 ▾
TroubleAtlas / Tools / Automotive / Tire Size Calculator

Will a new tire size change your speedometer?

Enter the size on your sidewall and a candidate size. See the diameter difference and the real-world price for your size, side by side.

Free, no sign-upRuns in your browser
Metric radial sizesPassenger-car tires
Real shop pricesBelow the calculator
Two car tyres and alloy wheels, front view

Compare two tire sizes

Use the size printed on the tire sidewall or on the manufacturer's vehicle label. Standard metric radial passenger-car sizes are supported.

Calculated in your browser. This is a nominal geometry estimate, not an installation approval.

225/45R17

Original
—Diameter change

245/40R18

Candidate
Overall diameter, candidate—
Estimated actual speed—
Important: matching diameter does not establish fitment. Check approved vehicle sizes, rim width, load and speed ratings, clearance, and local rules before changing tires.

How this tire size calculator works

A metric radial tire marking such as 225/45R17 uses a 225 mm nominal section width, 45% sidewall aspect ratio, and a 17-inch wheel rim. Changing the diameter changes how far the wheel travels per rotation, which can shift what the speedometer shows.

Show the formulas and a worked example
Sidewall height (mm) = width (mm) × aspect ratio ÷ 100
Overall diameter (mm) ≈ 25.4 × rim (in) + 2 × sidewall height
Circumference (mm) ≈ π × diameter
Revolutions per mile ≈ 1,609,344 ÷ circumference
Estimated actual speed ≈ indicated speed × candidate diameter ÷ original diameter

225/45R17 has a 101.25 mm sidewall and an estimated diameter of 634.3 mm. Changing to 245/40R18 gives 653.2 mm. At an indicated 60 mph, the diameter ratio suggests roughly 61.79 mph actual, if the speedometer was calibrated to the original size. No fitment, load, or safety claim is implied.

Ready to buy? Find real tyre prices for your size

The search below is the same tyre comparator already live on TroubleAtlas — same shops, same prices, same affiliate links.

Tell me the size. Or which car you drive.
Can't find your vehicle? The size is written on the tyre sidewall — for example 205/55 R16. Enter it above and I'll show you the prices.
You already searched: 205/55 R16 — change size

Today's deal

The lowest price we found on the most searched size in your country.

All offers ›
Pneumatico in vetrina sul piedistallo illuminato Deal of the day
35,50 €
each · 205/55 R16
Dunlop Sport BluResponse
205/55 R16Summer
35,50 €each · da gommadiretto.it
✓ Delivery in your country in 2-4 working days
✓ Returns within 14 days
✓ Sold and shipped by gommadiretto.it
Go to the price at gommadiretto.it
Price from the price list of gommadiretto.it

Questions we are often asked

Do you sell the tyres yourselves?

No. We compare the price lists of the shops that deliver in your country and take you to the cheapest one. You buy on their site, on their terms.

Is the price I see the price I pay?

Yes: it is the price the shop shows today. Next to it you'll find the date we read it, so you know how fresh it is. Delivery costs depend on the shop.

How do you earn?

When you buy from a shop we showed you, that shop pays us a commission. It costs you nothing extra and the price does not change.

How do you order the offers?

By the lowest price we know. The first price you see is never higher than the lowest we found.

The rest of the map

From here you reach the rest of TroubleAtlas.

How we earn. When you buy from a shop we showed you, that shop pays us a commission. It costs you nothing extra and the price does not change. The order in which you see the offers always starts from the lowest price we know.
TroubleAtlas Technical Team — page last checked: 25 September 2026. The data comes from the price lists of affiliated shops, read again every night. Rules cited: Regulation (EU) 2020/740 on tyre labelling and Directive 2014/45/EU on roadworthiness tests. Our method.
TroubleAtlas Technical Team — this calculator and its formulas were checked on 20 November 2026. Commercial tyre prices shown above come from the shared comparator, with its own freshness note just above this one. Our method.

Before you change anything

A nominal size match is not a fitment approval. Read this before ordering a candidate size.

Frequently asked questions

Can I install the new tire size?

This tool cannot tell you that. A small nominal diameter difference does not prove that a size is approved or safe for a particular vehicle or wheel. Replacement tires also need suitable load and speed ratings, rim-width compatibility, adequate physical clearance and vehicle/manufacturer approval. Michelin advises checking approved replacement dimensions. Avoid interpreting the frequently quoted "±3%" geometry rule of thumb as an approval threshold: this calculator shows the measured percentage without declaring fitment.

What happens if the new tire is taller?

For the same wheel rotational speed, a nominally larger circumference covers more ground. If the speedometer was calibrated to the original tire and nothing else changes, the vehicle may travel faster than the indicated speed.

What does R17 mean in a tire size?

R means radial construction. 17 means the tire is designed for a wheel rim with a nominal 17-inch diameter. The width is in millimetres; the aspect ratio is a percentage.

Does this compare load ratings and fitment?

No. Load index, speed rating, tire construction, wheel offset, rim width, clearances, homologation and brand-specific measured specifications are outside this geometric comparison. Verify these separately.

Can I compare motorcycle, flotation or LT tire sizes?

Not reliably with this first version. It is intended for standard three-part metric radial passenger-car sizes only. Other tire systems require separate calculation and validation.

Sources and update policy

  1. Continental — Tire markings (meaning of size notation).
  2. Michelin — Changing tire size or specifications (safety, load, approved size).
  3. Tire Rack — Checking speedometer accuracy (direction of speedometer change).
  4. Discount Tire — Tire size calculator (competitor reference and outputs).

Method version: 1.0 · Checked: 20 November 2026 · Coverage: nominal metric radial sizes.

Scroll to Top