E1
What code E1 means on a Beko washing machines, what causes it, and which part to check first.
● SEVERITY: MEDIUM
Beko E1 means: Ntc sensor open/short circuit error, (water temperature sensor) this error code is displayed on the machine screen. The documented cause is: To fix the problem, you need to replace the NTC sensor. . · TECHNICAL CHECK = Measure the resistance of the temperature sensor at room temperature is approximately 4700 O. room 25 °C
What E1 means
Ntc sensor open/short circuit error, (water temperature sensor) this error code is displayed on the machine screen
The display shows E1 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by centriassistenza.org
| DOCUMENTED CAUSE OR CHECK |
|---|
| To fix the problem, you need to replace the NTC sensor |
| TECHNICAL CHECK = Measure the resistance of the temperature sensor at room temperature is approximately 4700 O. room 25 °C |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. Water and mains electricity sit centimetres apart inside a washing machine. If the drum still holds water, drain it from the filter first — it can be scalding.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does E1 mean on a Beko?
Ntc sensor open/short circuit error, (water temperature sensor) this error code is displayed on the machine screen The documented cause is: To fix the problem, you need to replace the NTC sensor. . · TECHNICAL CHECK = Measure the resistance of the temperature sensor at room temperature is approximately 4700 O. room 25 °C
Can I fix E1 myself?
It depends on the part involved: To fix the problem, you need to replace the NTC sensor. . · TECHNICAL CHECK = Measure the resistance of the temperature sensor at room temperature is approximately 4700 O. room 25 °C Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Beko use other codes on this appliance?
Yes: we document 12 other codes for Beko on this washing machines. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.