E35
What code E35 means on a Kenmore washing machines, what causes it, and which part to check first.
● SEVERITY: MEDIUM
Kenmore E35 means: Water level pressure sensor detects overfill. The documented cause is: If the washer overfilled, unplug the power cord and see if water continues to fill the tub. If so, replace the water inlet valve assembly because a water valve isn't closing.
What E35 means
Water level pressure sensor detects overfill
The display shows E35 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by applianceaid.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| If the washer overfilled, unplug the power cord and see if water continues to fill the tub |
| If so, replace the water inlet valve assembly because a water valve isn't closing |
| If the washer didn't overfill, the water level pressure sensor usually needs replacing |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. Water and mains electricity sit centimetres apart inside a washing machine. If the drum still holds water, drain it from the filter first — it can be scalding.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does E35 mean on a Kenmore?
Water level pressure sensor detects overfill The documented cause is: If the washer overfilled, unplug the power cord and see if water continues to fill the tub. If so, replace the water inlet valve assembly because a water valve isn't closing. If the washer didn't overfill, the water level pressure sensor usually needs replacing
Can I fix E35 myself?
It depends on the part involved: If the washer overfilled, unplug the power cord and see if water continues to fill the tub. If so, replace the water inlet valve assembly because a water valve isn't closing. If the washer didn't overfill, the water level pressure sensor usually needs replacing Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Kenmore use other codes on this appliance?
Yes: we document 142 other codes for Kenmore on this washing machines. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.