Beko washing machines fault codes
Every Beko washing machines fault code we have documented, with what it means. Pick yours to see causes, checks and the parts involved.
● 13 codes documented
Beko uses 13 fault codes on its washing machines, shown on the display when the machine stops — among them E1, E18, E2, E3, H1. Each one points to a specific part: on this page you find them all, with what they mean.
How to read the code on the display
On most Beko appliances the code appears on the display when the cycle stops, or is spelled out by a sequence of blinking lights.
Write the code down before switching off: many machines clear it when unplugged, and without the code the fault has to be found from scratch.
Replacement parts
Tools you'll need
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
All Beko codes
13 codes, in order. Click one to open its page.
| CODE | WHAT IT MEANS |
|---|---|
| E1 | Errore di circuito aperto/cortocircuito del sensore Ntc, (sensore temperatura acqua) questo codice di errore… |
| E18 | Se c'è questo errore sullo schermo della tua macchina, hai lanciato un carico sbilanciato sulla macchina… |
| E2 | Si tratta di un errore di circuito aperto del riscaldatore, in questo caso non viene riscaldata alla… |
| E3 | La resistenza di riscaldamento acqua è continuamente accesa, in questo caso la lavatrice si surriscalda |
| H1 | NTC thermistor open or short circuit |
| H11 | Motor or tachogenerator open circuit |
| H2 | Heater detected open circuit failed heating element |
| H3 | Heater detected stuck on / heater triac short circuit |
| H4 | Inlet valve triac short circuit |
| H5 | Pump open circuit failed drain pump or wiring fault |
| H6 | Motor triac short circuit |
| H7 | Pressure sensor failure |
| H8 | Tachometer / motor speed sensor fault |