E01
What code E01 means on a Midea washing machines, what causes it, and which part to check first.
● SEVERITY: LOW
Midea E01 means: Water Inlet Timeout. The documented cause is: Water supply valves not fully open (most common) · Kinked or pinched inlet hoses · Clogged inlet screen filters (mesh filters at the hose connection points)
What E01 means
Water Inlet Timeout
The display shows E01 and the machine stops until the fault is cleared.
What the technical documentation says
Causes documented in the technical source published by easybear-appliancerepair.com
| DOCUMENTED CAUSE OR CHECK |
|---|
| Water supply valves not fully open (most common) |
| Kinked or pinched inlet hoses |
| Clogged inlet screen filters (mesh filters at the hose connection points) |
| Failed water inlet valve (solenoid does not open) |
| Low household water pressure (Midea requires minimum 14.5 PSI) |
| Both hot and cold required but only one connected (some cycles require both) |
Replacement parts
Tools you'll need
Before you open anything
Unplug the machine and close the water tap before removing any panel. Water and mains electricity sit centimetres apart inside a washing machine. If the drum still holds water, drain it from the filter first — it can be scalding.
What to check, in order
From the quickest check to the one that needs a technician.
Find a specialist
TroubleAtlas Pro
TroubleAtlas Certified
What is the TroubleAtlas Score?
Beyond fault codes and specialists, we rate the reliability of appliance brands and models — a transparent score that owes nothing to the manufacturer. The reference to check before you buy or repair.
See all appliance scores →TA YouTube Channel
Frequently asked questions
What does E01 mean on a Midea?
Water Inlet Timeout The documented cause is: Water supply valves not fully open (most common) · Kinked or pinched inlet hoses · Clogged inlet screen filters (mesh filters at the hose connection points) · Failed water inlet valve (solenoid does not open) · Low household water pressure (Midea requires minimum 14.5 PSI) · Both hot and cold required but only one connected (some cycles require both)
Can I fix E01 myself?
It depends on the part involved: Water supply valves not fully open (most common) · Kinked or pinched inlet hoses · Clogged inlet screen filters (mesh filters at the hose connection points) · Failed water inlet valve (solenoid does not open) · Low household water pressure (Midea requires minimum 14.5 PSI) · Both hot and cold required but only one connected (some cycles require both) Clearing a filter or straightening a hose is within reach of anyone; anything behind a panel means mains electricity and water together — that is a job for a technician.
Does Midea use other codes on this appliance?
Yes: we document 6 other codes for Midea on this washing machines. They are listed at the bottom of this page, each with its own meaning.
Does the same code mean the same thing on other brands?
Often not. The same two characters can point to completely different faults depending on the manufacturer — always check the page for your own brand.