Robot Dogs: Specifications, Prices and Makers

🌐 ▾
FOUR LEGS

Robot dogs, measured.

Stable, rugged, no hands — and the corner of legged robotics where money actually changes hands today. This is also the only family where you can read a price without asking for one.

See the specifications → 🛒 Where to buy one
HOW TO READ ONE

The figures that decide whether it fits your site

A quadruped is judged on what it can carry, how far it gets on a charge, and whether it survives the weather. Height matters less than on a biped: what matters is step height and slope. Below, the machine in our census whose maker publishes the most figures — in both the units you measure in and the ones the datasheet was written in.

15.7 in
400 mm
STANDING HEIGHT
33 lb
15 kg
MASS
15 lb
7 kg
PAYLOAD
2.5 m/s
9.0 km/h
TOP SPEED
1 h
on one charge
RUNTIME
MODELUnitree Go2 AIR
SOURCEunitree.com/go2 · read on 28/08/2026
Figures as published by the manufacturer on the day we read them. Where a maker publishes a range, we show the lower end and link the page it came from.
Unitree Go2 AIR
Humanoid robot spare parts: rotary actuator, harmonic reducer, wiring harness, two-finger gripper and battery pack
WHERE TO BUY
Whole robots, and the parts that wear out

Actuators, harnesses, battery packs, end effectors — the parts a legged machine actually goes through. We check every storefront from your own country, so the price and the delivery you see are the ones you would really pay.

Complete robots → Parts and spares →
Offers below are matched to the country you are reading from, each shown in the currency that seller actually charges.
WHOLE MACHINES

The complete robot, not its parts. These open the shop that serves your own country, with our tag, so the price and delivery you see are the ones you would really pay.

ON VIDEO

See them move

A specification sheet will not tell you how a machine recovers from a shove, or how long it takes to stand up. Video will.

THE DIRECTORY

The makers, on the record

Everyone we track, ordered by how much of the field they cover. The badge on each card tells you where its figures came from: straight from the manufacturer, or from a reseller listing we had to cross-check.

Every card shows that maker's line-up with the price of each machine.

10
models
$1,600
entry price
official from the manufacturer
4
models
$289
entry price
official from the manufacturer
2
models
—
entry price
  • ANYmalnot published
  • ANYmal Xnot published
official from the manufacturer
2
models
—
entry price
reseller from a reseller, cross-checked
1
model
—
entry price
official from the manufacturer
6 makers shown Reference prices are shown in the currency the manufacturer publishes them in — we quote sellers, we never convert at an exchange rate of our own. Where a seller prices in your currency, you will see that figure in the buying section.
WHAT IT COSTS

What your money actually buys

Robot dogs are the one family where you can read a price without asking for one — but only at the light end. Each dot is one machine.

Under 10,000 entry · $ or €

Desktop kits you can program, and the four-legged machines that made this family popular. These are the ones sold with a price on the page.

10,000 – 40,000 development · $ or €

Mid-range quadrupeds sold to integrators and utilities. In this band a figure is usually given by quotation, not published.

Above 40,000 industrial · $ or €

Industrial platforms rated for weather and continuous shifts, sold with a service contract rather than shipped in a box.

No public price announced only

The machines actually working on sites and in substations. Their makers publish the specification in full — and not the price.

The bands are ours; the prices inside them are as published by the manufacturer or by an authorised reseller, never estimated. A few makers publish in euros rather than dollars, and we group them by the figure they publish rather than converting it — the bands give an order of magnitude, not an exchange rate.

How this page is built

This page is rebuilt automatically from our own census of humanoid manufacturers. It is a snapshot, and it says which day it was taken.

  • Where a manufacturer publishes an official specification, we use it and mark it official.
  • Where only a reseller lists the machine, we mark the figure as cross-checked rather than present it as fact.
  • Nothing is estimated, rounded up, converted at an invented exchange rate, or copied from another comparison site.
TroubleAtlas Technical Team Last verified 2026-08-31 Our methodology
Where to go next

The rest of the map

Every page here answers a different question. This is the whole set, so you never have to go back to a search engine to move from one to the next.

Scroll to Top