Home › Garden & power tools › Robot mowers › Husqvarna Automower® 220 AC
HusqvarnaAutomower® 220 AC
Robot mower. Spare parts with Husqvarna’s own order codes, and the troubleshooting chapter of the operator’s manual.
No longer built — parts still listed Photograph: a robot mower. We hold no photograph of this exact machine, and we would rather say so than pass one off.
What actually breaks
Open the problem that matches yours. Everything inside comes from the troubleshooting chapter of the operator’s manual Husqvarna publishes for this model — a 80-page document we read on 10 September 2026.
Fault messages shown on the display 34 lines
Husqvarna sets this out as a table with the columns “Symptom”, “Cause”, “Action”. We print the lines in the maker’s order.
- Uneven mowing results
- Automower® works too few hours per day.
- Increase the mowing time, see 6.4 Timer (2) on page 47.
- Working area too large.
- Try limiting the working area or extending the working time, see 6.4 Timer (2) on page 47.
- Dull blades.
- Replace all the blades and screws so that the rotating parts are balanced.
- Long grass in relation to the set cutting height.
- Increase the cutting height and then successively lower.
- The mower seems to work more at the top of a slope than at the bottom.
- Change the Installation shape (3-3) setting to Open.
- Accumulation of grass by the blade disc or around the motor shaft.
- Check that the skid plate and blade disc rotate easily. If not, the skid plate and perhaps the blade disc must be removed and the grass and foreign objects removed. See 8.5 Cleaning on page 68.
- Automower® runs at the wrong time
- The clock on Automower® needs to be set.
- Set the clock, see Time and date
- (4-4) on page 60.
- The start and stop times for mowing are incorrect.
- Adjust the start and stop time settings for mowing, see 6.4 Timer (2) on page 47.
- Automower® vibrates
- Unbalanced blade disc or damaged blades.
- Inspect the blades and screws and replace them if necessary.
- Automower® runs, but the blade disc does not rotate
- Automower® is looking for the charging station.
- No action. The blade disc does not rotate when the mower is searching for the charging station.
- The mower mows for shorter periods than usual between charges
- Grass or a foreign object is blocking the blade disc or skid plate.
- Dismantle and clean the skid plate and blade disc.
- Both the mowing and charging times are shorter than usual
- This behavior is normal in high temperatures (gradually increasing above 77 °F (25 °C)).
- No action.
- Automower® starts mowing directly outside of the charging station instead of following the loop out
- Change corridor width and/or reversing distance.
- BvAM220-230_2013_US.book Page 74 Thursday, December 4, 2014 3:03 PM
Why we quote instead of rewriting. The manual is laid out as a table. Read by machine, a PDF loses the boundaries between columns, and pairing a symptom with the wrong remedy would give you a page that is confidently wrong rather than obviously broken. So we keep the maker’s order and words, and tell you how the table is built. The manual itself is linked further down.
Parts & prices
Every code below is Husqvarna’s own, read from the maker’s parts pages for this exact model. The code is printed on the part itself — on a label, moulded into the plastic or stamped in the metal. Read it off the broken part and type it here to find it straight away.
We hold no photograph of the individual parts: Husqvarna does not publish them, and we would rather say so than show you the wrong picture. Prices are the maker’s United States list prices on the day we read them — an order of magnitude, not a quote. The buttons search shops in your own country, and those shops pay us a commission.
Where to buy
The search opens in your own country’s shop, in that shop’s language, with our tracking — the shop pays us a commission, you pay the same price.
Tools you’ll need
Chosen for this family, not a generic list. Prices and availability come from the shop in your country, with our tracking.
Specifications
Copied field for field from the manufacturer’s own product page on 10 September 2026, in the maker’s units. We do not convert them: a rounded conversion is how a torque figure quietly becomes wrong.
Manuals & documents
We link the maker’s documents instead of re-hosting them, so you always open the version Husqvarna is publishing today.
Other machines in this family
Machines in the same family for which we also have the maker’s codes, prices and troubleshooting chapter. The whole family →
A polished page on our site: name, services, photos, contacts and area. Always online, always up to date, backed by our technical authority.
- Your professional showcase
- Present where people search — and cited by AIs
- 24/7 automatic assistant
- Bookings on Google Calendar
- Google reviews on show
- Optimization for AIs
Our sources
- Husqvarna support 15 specification fields and 29 parts with the maker’s code and list price, read on 10 September 2026.
- Operator's Manual Published: 11/29/2017 12 MB, EN 80 pages, read on 10 September 2026. The troubleshooting chapter quoted above.
What is missing, said plainly. We hold no photograph of this exact machine, no repair times and no failure statistics — nobody publishes those honestly. Prices are Husqvarna’s United States list prices and will differ in your country. We are not a dealer: we do not stock parts, and the buttons search shops that pay us a commission.
TroubleAtlas Technical Team · Compiled from manufacturer documents read on 10 September 2026 · Last checked 26 September 2026 · How we verify