Home › Garden & power tools › Chainsaws › Husqvarna 225i Power Axe without battery and charger
Husqvarna225i Power Axe without battery and charger
Battery chainsaw. Spare parts with Husqvarna’s own order codes, and the troubleshooting chapter of the operator’s manual.
Photograph: a chainsaw. We hold no photograph of this exact machine, and we would rather say so than pass one off.
What actually breaks
Open the problem that matches yours. Everything inside comes from the troubleshooting chapter of the operator’s manual Husqvarna publishes for this model — a 96-page document we read on 10 September 2026.
Fault messages shown on the display 16 lines
Husqvarna sets this out as a table with the columns “LED screen”, “Possible faults”, “Possible solution”. We print the lines in the maker’s order.
- The warning indicator flashes.
- Chain brake is engaged.
- Disengage the chain brake.
- Temperature deviation.
- Let the product to cool down.
- Overload. The saw chain can not move.
- Release the saw chain.
- The power trigger and the start/stop button are pushed at the same time.
- Release the power trigger to activate the product.
- Orange activate LED flashing.
- Low battery voltage.
- Charge the battery.
- The warning indicator is on.
- Service.
- Speak to your servicing dealer.
- Battery
Further checks in the same chapter 27 lines
Husqvarna sets this out as a table with the columns “LED display”, “Possible faults”, “Possible solution”. We print the lines in the maker’s order.
- Green LED flashes.
- Low battery voltage.
- Charge the battery.
- Error LED flashes.
- Temperature deviation.
- Use the battery in temperatures between -10°C (14°F) and 40°C
- (104°F).
- Too much voltage.
- Make sure that the mains voltage aligns with the voltage of the product.
- Refer to the rating plate on the product.
- Remove the battery from the battery charger.
- Error LED comes on.
- Too much cell difference (1V).
- Speak to your servicing dealer.
- Battery charger
- Condition
- Possible faults
- Possible procedure
- The charging LED is red.
- Permanent battery charger error.
- Speak to your dealer.
- The charging LED flashes green.
- Temperature deviation, the battery is too cold or too hot to use or charge.
- Let the battery cool down or warm it up. When the battery has the correct temperature, it can be used or charged again. Use the battery charger in ambient temperatures between 5 °C (41 °F) and 40 °C (104 °F).
- The charging LED flashes red.
- Faulty battery
- Speak to your dealer
Why we quote instead of rewriting. The manual is laid out as a table. Read by machine, a PDF loses the boundaries between columns, and pairing a symptom with the wrong remedy would give you a page that is confidently wrong rather than obviously broken. So we keep the maker’s order and words, and tell you how the table is built. The manual itself is linked further down.
Parts & prices
Every code below is Husqvarna’s own, read from the maker’s parts pages for this exact model. The code is printed on the part itself — on a label, moulded into the plastic or stamped in the metal. Read it off the broken part and type it here to find it straight away.
We hold no photograph of the individual parts: Husqvarna does not publish them, and we would rather say so than show you the wrong picture. Prices are the maker’s United States list prices on the day we read them — an order of magnitude, not a quote. The buttons search shops in your own country, and those shops pay us a commission.
Where to buy
The search opens in your own country’s shop, in that shop’s language, with our tracking — the shop pays us a commission, you pay the same price.
Tools you’ll need
Chosen for this family, not a generic list. Prices and availability come from the shop in your country, with our tracking.
Specifications
Copied field for field from the manufacturer’s own product page on 10 September 2026, in the maker’s units. We do not convert them: a rounded conversion is how a torque figure quietly becomes wrong.
Manuals & documents
We link the maker’s documents instead of re-hosting them, so you always open the version Husqvarna is publishing today.
Other machines in this family
Machines in the same family for which we also have the maker’s codes, prices and troubleshooting chapter. The whole family →
A polished page on our site: name, services, photos, contacts and area. Always online, always up to date, backed by our technical authority.
- Your professional showcase
- Present where people search — and cited by AIs
- 24/7 automatic assistant
- Bookings on Google Calendar
- Google reviews on show
- Optimization for AIs
Our sources
- Husqvarna support 16 specification fields and 10 parts with the maker’s code and list price, read on 10 September 2026.
- Operator's Manual Published: 4/29/2025 5.42 MB, EN, ES, FR 96 pages, read on 10 September 2026. The troubleshooting chapter quoted above. This document also covers 1 other model.
What is missing, said plainly. We hold no photograph of this exact machine, no repair times and no failure statistics — nobody publishes those honestly. Prices are Husqvarna’s United States list prices and will differ in your country. We are not a dealer: we do not stock parts, and the buttons search shops that pay us a commission.
TroubleAtlas Technical Team · Compiled from manufacturer documents read on 10 September 2026 · Last checked 26 September 2026 · How we verify