Husqvarna sets this out as a table with the columns “Problem”, “Possible causes”, “Recommended step”. We print the lines in the maker’s order.

• The blade moves slowly or does not move.
• The blade is blocked or it is damaged.
• Clean the blades from unwanted materials. Refer to To clean and lubricate the blades on page 15. Remove burrs from the blade, refer to To examine the blades on page 15. Replace the blade if it is damaged.
• The blade does not cut easily.
• The blade is not sharp or it is damaged.
• Sharpen the blade, refer to To examine the blades on page 15. Replace the blade if it is damaged.
• The blade becomes hot.
• There is friction between the blades.
• Remove burrs from the blade and lubricate the blade.
• Refer to To clean and lubricate the blades on page 15.
• User interface

Husqvarna sets this out as a table with the columns “Problem”, “Possible faults”, “Possible action”. We print the lines in the maker’s order.

• Battery LED indicator flashes orange
• Low battery voltage.
• Charge the battery.
• Error LED flashes red
• Overload.
• The cutting attachment is jammed. Push and hold the On/Off button to set the product to
• Off. Remove the battery. Clean the cutting attachment from unwanted materials.
• Temperature deviation.
• Let the product cool down.
• The power trigger and the activate button are pressed at the same time.
• Release the power trigger and the product is active.
• The product does not start
• Dirt in the battery connectors.
• Clean the battery connectors with compressed air or a soft brush.
• Error LED is lit with red light
• The product needs servicing.
• Contact your servicing agent.
• Battery 40-B220X 1 Symptoms
• Cause
• Action
• The troubleshooting may differ for other battery models. Refer to the operator's manual of the battery for information about how to use the battery. Only use Husqvarna approved batteries.
• The battery error indicator flashes.
• The battery is empty.
• Charge the battery.
• Heavy workload in combination with very low battery temperature.
• Make the battery warm. For example, move it indoors or operate at low speed until the battery is warm.
• The battery does not operate. The operating range of the battery is at its limit.
• Remove the battery from the product.
• Let the battery rest, and then push the battery indicator button.
• The battery temperature indicator is
• ON.
• The battery is too cold or too hot to use.
• Keep the battery in an ambient temperature between -10°C (14°F) and 40°C (104°F). When the battery has the correct temperature, it can be used again.
• The battery temperature indicator flashes.
• The battery is near its temperature limits.
• Decrease the speed and/or workload.
• Keep the battery in the preferred temperature between +10°C (50°F) and +30°C (86°F) for optimal performance.
• The battery temperature indicator is
• ON while the battery is in the charger.
• Temperature deviation, the battery is too cold or too hot to charge.
• Let the battery cool down or move it indoors to warm it up. When the battery has the correct temperature, it can be charged again. Make sure to use the charger where the ambient temperature is between 5°C (41°F) and 40°C (104°F). Keep the charger away from sunlight. If the problem
• continues, speak to your dealer.
• The battery error indicator comes on.
• The battery has a critical error.
• Speak to your dealer.
• Battery charger 40-C500X 2 Symptoms
• Possible faults
• Possible procedure
• The charging indicator on the charger is yellow.
• The battery error indicator flashes, or the battery temperature indicator is on.
• Temperature deviation, the battery is too cold or too hot to use or charge.
• If the battery is too hot, keep it connected to the charger.
• The built-in fan of the charger decreases the temperature of the battery. When the battery has the recommended temperature, the charging starts automatically.
• If the battery is too cold, move it indoors. When the battery has the recommended temperature, continue the charging.
• Obey the temperature range for operation, refer to the operator's manual of the battery charger. Keep the charger away from sunlight. If the problem continues, speak to your dealer.
• The charging indicator on the charger is yellow. The battery error indicator on the battery is on.
• The battery has a critical error.
• Speak to your dealer.
• The troubleshooting may differ for other battery charger models. Refer to the operator's manual of the battery charger for information about how to use the battery charger. Only use Husqvarna approved battery chargers.
• The charging indicator on the charger is red.
• The charger has a critical error.
• Speak to your dealer.